External Brass Fixed Spiral Fittings Selection Guide: Technical Criteria & Application Standards
External Brass Fixed Spiral Fittings selection guide: technical parameters, mounting and compliance standards, and Ortaç comparison.
An external-type brass fixed spiral conduit fitting is a brass fitting that connects the end of heavy-duty PVC-coated galvanized spiral conduit to enclosure sheet metal, a junction box or a device housing, and whose body and thread move as a single piece. It is used for end connections of heavy-duty and steel wire braided metal spiral lines in industrial environments with liquid splashes and dust, and in fixed installations where the conduit can be turned freely during installation. The Ortaç LSRP series is listed in this category with size codes such as 00, 01, 01A, 02 and 2A; the without nut wording in the product names indicates that the lock nut is not included in the package. Choose the fitting by the type and nominal size of the spiral conduit, the PG thread size of the entry and whether the conduit can be turned during installation. The match between the size code and the conduit and thread size is given in the manufacturer table. The fixed type does not replace the rotating fitting in installations where the thread must be turned separately after the conduit has been connected in place. The External Brass Fixed Spiral Fittings category on Welibaba includes 10 active models from leading manufacturers such as Ortaç.
Key Technical Parameters for Selecting External Brass Fixed Spiral Fittings
To specify the right External Brass Fixed Spiral Fittings model for your panel or installation, verify the following parameters against your engineering schedule:
| Parameter | Typical Catalog Values | Verification Note |
|---|---|---|
| Thread Length | 10 mm, 11.5 mm, 13 mm, 15 mm | Verify against project schedule and load calculation |
| Thread Size | PG 11, PG 13, 5, PG 16 | Verify against project schedule and load calculation |
| Cover Material | Nikel Kaplı Pirinç | Verify against project schedule and load calculation |
| Connection Thread | PG (DIN 40430) | Verify against project schedule and load calculation |
Installation, Compatibility, and Commissioning Checklist
- Electrical & Mechanical Matching: Confirm that rated voltage, current capacity, and mounting dimensions align with the upstream and downstream components in Spiral Conduit Fittings.
- Environmental & Enclosure Rating: Check IP protection class, housing material, and terminal capacity for dusty, humid, or high-vibration industrial environments.
- Related Product Groups: If your application calls for a different form factor or rating, compare sibling categories such as External Brass Swivel Spiral Fittings, Brass Swivel Spiral Fittings, Brass Fixed Spiral Fittings.
Frequently Asked Questions
What is the first parameter to check when selecting External Brass Fixed Spiral Fittings?
Start by confirming the circuit's rated electrical values and physical mounting dimensions, then use the technical attribute filters on the External Brass Fixed Spiral Fittings page to narrow down compatible series.
Which External Brass Fixed Spiral Fittings brands are available on Welibaba?
Welibaba currently stocks 10 active models in this category from manufacturers including Ortaç, complete with verified specifications and unit pricing.
How can I compare External Brass Fixed Spiral Fittings models by manufacturer part number?
You can search directly by manufacturer SKU/order code or use the category filter panel to compare equivalent models across brands side by side.