Horizontal Type Metal Sheet Panels Selection Guide: Technical Criteria & Application Standards
Horizontal Type Metal Sheet Panels selection guide: technical parameters, mounting and compliance standards, and Çetinkaya Pano comparison.
A horizontal metal sheet panel is a wall-mounted sheet steel panel made wider than it is tall. It is used on machine housings where height is limited, and in control panels where devices are lined up side by side in one or two rows. This category lists Çetinkaya Pano's Metal Eko series horizontal panels in sizes such as 25x20x15, 35x25x15, 40x30x20 and 60x50x30; the dimensions give width, height and depth in centimeters. Choose the panel by the width, height and depth that fit the space at the mounting location, cable entry direction, and the layout of the devices to be installed inside. A horizontal panel should not be confused with a vertical panel of the same dimensions; in the product name the first number gives the width, so 40x30x20 indicates a horizontal panel and 30x40x20 a vertical one. The Horizontal Type Metal Sheet Panels category on Welibaba includes 20 active models from leading manufacturers such as Çetinkaya Pano.
Key Technical Parameters for Selecting Horizontal Type Metal Sheet Panels
To specify the right Horizontal Type Metal Sheet Panels model for your panel or installation, verify the following parameters against your engineering schedule:
| Parameter | Typical Catalog Values | Verification Note |
|---|---|---|
| Size Type | 250x200x150mm, 300x200x105mm, 300x250x150mm, 350x250x150mm | Verify against project schedule and load calculation |
| Seal | Kapı: poliüretan sıvı conta | Verify against project schedule and load calculation |
| Housing Paint | RAL 7035 epoksi polyester elektrostatik toz boya | Verify against project schedule and load calculation |
| Mounting plate | Taban Saclı | Verify against project schedule and load calculation |
Installation, Compatibility, and Commissioning Checklist
- Electrical & Mechanical Matching: Confirm that rated voltage, current capacity, and mounting dimensions align with the upstream and downstream components in Metal Sheet Panels.
- Environmental & Enclosure Rating: Check IP protection class, housing material, and terminal capacity for dusty, humid, or high-vibration industrial environments.
- Related Product Groups: If your application calls for a different form factor or rating, compare sibling categories such as Wall-Mount Metal Sheet Panels.
Frequently Asked Questions
What is the first parameter to check when selecting Horizontal Type Metal Sheet Panels?
Start by confirming the circuit's rated electrical values and physical mounting dimensions, then use the technical attribute filters on the Horizontal Type Metal Sheet Panels page to narrow down compatible series.
Which Horizontal Type Metal Sheet Panels brands are available on Welibaba?
Welibaba currently stocks 20 active models in this category from manufacturers including Çetinkaya Pano, complete with verified specifications and unit pricing.
How can I compare Horizontal Type Metal Sheet Panels models by manufacturer part number?
You can search directly by manufacturer SKU/order code or use the category filter panel to compare equivalent models across brands side by side.