Lighting Remote Controls Selection Guide: Technical Criteria & Application Standards
Lighting Remote Controls selection guide: technical parameters, mounting and compliance standards, and ACK, Cata, İnoled comparison.
A lighting control is a multi-channel wireless switching set that allows lamp groups connected to a receiver unit to be turned on and off separately with a remote control. It is used in multi-arm chandeliers, spot groups and cove lighting lines to set up stepped lighting without running a separate switch line for each group. This category includes Cata and İnoled brand models with 3, 4, 6 and 10 channels; İnoled controls state a 20 m sensing distance, and Cata models state channel power arrangements such as 3 x 1000 W, 6 x 1000 W and 10 x 500 W. Choose the control by a number of channels sufficient for the number of groups you will switch separately, and by the channel power and sensing distance suited to the type and total power of the lamps to be connected to each group. Channel power depends on the lamp type; for LED and fluorescent lamps the permitted power falls below the value given for incandescent lamps. In Cata data there is also a separate value such as 3 x 100 W for use without a contactor; verify the applicable limit from the manufacturer's data. These controls switch lamp groups on and off and do not replace an RGB control that changes color in LED strip. The Lighting Remote Controls category on Welibaba includes 20 active models from leading manufacturers such as ACK, Cata, İnoled.
Key Technical Parameters for Selecting Lighting Remote Controls
To specify the right Lighting Remote Controls model for your panel or installation, verify the following parameters against your engineering schedule:
| Parameter | Typical Catalog Values | Verification Note |
|---|---|---|
| Product Type | 4 Yollu Showroom IR Kontrol Ünitesi, Aydınlatma Kumandası, Havuz Armatürü Kumandası, Kumandalar | Verify against project schedule and load calculation |
| Model | AY26-01010, AY30-00110, AY30-00120, AY30-00140 | Verify against project schedule and load calculation |
| IP Rating | IP20 | Verify against project schedule and load calculation |
| Voltage | AC 110V 240V, AC 220V 240V, AC 90–230 V, DC 12 V | Verify against project schedule and load calculation |
Installation, Compatibility, and Commissioning Checklist
- Electrical & Mechanical Matching: Confirm that rated voltage, current capacity, and mounting dimensions align with the upstream and downstream components in Remote Controls.
- Environmental & Enclosure Rating: Check IP protection class, housing material, and terminal capacity for dusty, humid, or high-vibration industrial environments.
- Related Product Groups: If your application calls for a different form factor or rating, compare sibling categories such as RGB Remote Controls.
Frequently Asked Questions
What is the first parameter to check when selecting Lighting Remote Controls?
Start by confirming the circuit's rated electrical values and physical mounting dimensions, then use the technical attribute filters on the Lighting Remote Controls page to narrow down compatible series.
Which Lighting Remote Controls brands are available on Welibaba?
Welibaba currently stocks 20 active models in this category from manufacturers including ACK, Cata, İnoled, complete with verified specifications and unit pricing.
How can I compare Lighting Remote Controls models by manufacturer part number?
You can search directly by manufacturer SKU/order code or use the category filter panel to compare equivalent models across brands side by side.