Delta Lyte 2 DRL-12V120W1EN Rail-Mount Power Supply 12V 10.0A Output, Aluminum Case
- Brand: Delta Electronics
- SKU: DRL-12V120W1EN
- MPN: DRL-12V120W1EN
- Price: 1181.77 TRY + VAT · incl. VAT 1418.12 TRY
- Availability: In stock
- DIN Rail Power Supplies
- Delta Electronics DIN Rail Power Supplies
- Selection guide: DIN Rail Power Supplies Selection Guide: Technical Criteria and Engineering Practice
Delta DRL-12V120W1EN is a DIN rail power supply of the LYTE II series with 12 V DC, 10 A and 120 W output. Supplies suitable DC loads from a single-phase 90–264 V AC input. Output voltage is adjustable within the 10.8–13.2 V DC range. The dimensions of the TS35 DIN rail-mounted device, as height × width × depth, are 123.6 × 30 × 116.8 mm. The 30 mm housing width makes it easier to plan the layout inside the panel. Cooled by natural convection; the DC OK status is shown by a green LED. This N model has no DC OK relay contact. With 230 V AC input and at full load, typical efficiency is around 86%. It can operate between −40 °C and +70 °C; output power must be derated above +50 °C at 230 V AC input and above +40 °C at 115 V AC input. Derating is also required for inputs below 100 V AC. Full power should not be expected at all temperatures without taking these conditions into account. It has overvoltage, overload/overcurrent, overtemperature and short-circuit protections. Provides constant current limiting for inductive and capacitive loads. Before ordering, check the DC voltage of your load, its continuous and initial inrush current, the temperature inside the panel and the mounting clearances.
| Output Voltage | 12 V DC |
|---|---|
| Output Current | 10 A |
| Power | 120 W |
| Supply Type / Input Voltage | 90–264 V AC |
| Phase Type | 1-Phase |
| Output Voltage Adjustment Range | 10,8–13,2 V DC |
| Efficiency | %86 (230 V AC, %100 load, tipik) |
| Mounting Style | TS35 DIN ray (EN 60715) |
| Product Dimensions | 123,6 × 30 × 116,8 mm (yükseklik × genişlik × derinlik) |
| Gram | 0.45 kg |
| Operating Temperature | −40…+70 °C; sıcaklığa bağlı güç azaltımı gerekir |
| Power derating conditions | 115 V AC: +40 °C üzerinde %1,67/°C; 230 V AC: +50 °C üzerinde %2,5/°C; 100 V AC altında %1/V |
| Overvoltage Protection | < 17,4 V, SELV çıkış, kilitlenerek kapanma |
| Overcurrent Protection | Anma load akımının %105–150 düzeyi; Vo > %80 iken sürekli akım sınırlama, otomatik toparlanma |
| High Temperature Protection | Kilitlenerek kapanma |
| Short-Circuit Protection | Hiccup modu; arıza giderilince otomatik toparlanma |
| DC OK relay contact | None |
| Cooling Type | Doğal konveksiyon |
| Nominal input voltage | 100–240 V AC |
| Input frequency | 47–63 Hz (nominal 50–60 Hz) |
| Input current | 115 V AC: 2,1 A; 230 V AC: 1,3 A (tipik) |
| No-load power consumption | 0,15 W maksimum (115 / 230 V AC) |
| Inrush current | 35 A (230 V AC, soğuk başlangıç, tipik) |
| Leakage current | < 0,5 mA (240 V AC) |
| Voltage Tolerance | Fabrika ayarı: ±%1 |
| Line Regulation | ±%0,5 (115 / 230 V AC) |
| Load Regulation | ±%1,0 |
| Output Ripple | < 120 mVpp (0…+70 °C); < 360 mVpp (−30…0 °C); 20 MHz bant genişliği, veri sayfası ölçüm koşullarında |
| Rise Time | 30 ms (115 / 230 V AC, tipik) |
| Start-up time | 500 ms (115 / 230 V AC, tipik) |
| Hold-up time | 115 V AC: 10 ms; 230 V AC: 16 ms (%100 load, tipik) |
| Start-up with capacitive loads | 8000 µF maksimum |
| Housing Material | Kapak SGCC / şasi alüminyum |
| Power Indicator | Yeşil DC OK LED |
| Input terminal | 3 kutup: L, N, PE; 300 V / 30 A |
| Output terminal | 4 kutup: 1–2 V−, 3–4 V+; 300 V / 20 A |
| Input Cable Cross-Section | AWG 18–12 |
| Output Cable Cross-Section | AWG 18–12 |
| Terminal tightening torque | En fazla 4 kgf·cm |
| Storage Temperature | −40…+85 °C |