Schneider LC1D183BD TeSys D Contactor 3P(3 NO) AC-3 <= 440V 18A 24V DC Coil
- Brand: Schneider Electric
- SKU: LC1D183BD
- MPN: LC1D183BD
- Availability: Out of stock
- Contactors
- Schneider Electric Contactors
- Selection guide: Contactors Selection Guide
- Schneider Electric LC1D183BD Teknik Veri Föyü (PDF)
Schneider LC1D183BD TeSys D Contactor 3P(3 NO) AC-3 <= 440V 18A 24V DC Coil. Contactors are power switches that open and close by means of a coil; they are used in motor, heater and power factor correction stages. Stock code: LC1D183BD.
| Series | TeSys Deca Advanced |
|---|---|
| Product Type | Kontaktör |
| Contactor Application | Direnç loadü; Motor kontrol |
| Utilization Category | AC-3; AC-3e; AC-1; AC-4 |
| Pole Arrangement | 3P |
| Rated Operational Voltage (Ue) | Güç devresi: <= 690 V AC 25…400 Hz; Güç devresi: <= 300 V DC |
| Power Pole Contact Arrangement | 3 NA |
| Conventional Free Air Thermal Current (Ith) | 25 A (at 60 °C) for güç devresi; 10 A (at 60 °C) for sinyalleme devresi |
| Rated Making Capacity (Irms) | 140 A AC for sinyalleme devresi (IEC 60947-5-1); 250 A DC for sinyalleme devresi (IEC 60947-5-1); 300 A at 440 V for güç devresi (IEC 60947) |
| Rated Breaking Capacity | 300 A at 440 V for güç devresi (IEC 60947) |
| Associated Fuse Rating | 10 A gG for sinyalleme devresi (IEC 60947-5-1); 50 A gG at <= 690 V coordination tip 1 for güç devresi; 35 A gG at <= 690 V coordination tip 2 for güç devresi |
| Average Impedance | 2,5 mOhm - Ith 25 A 50 Hz for güç devresi |
| Power Loss per Pole | 2,5 W AC-1; 0,8 W AC-3; 0,8 W AC-3e |
| Overvoltage category | III |
| Pollution Degree | 3 |
| Rated Impulse Withstand Voltage (Uimp) | 6 kV (IEC 60947) |
| Safety Reliability Level (B10d) | B10d = 1369863 cycles nominal yüklü kontaktör (EN/ISO 13849-1); B10d = 20000000 cycles mekanik yüklü kontaktör (EN/ISO 13849-1) |
| Mechanical Endurance | 30 Mcycles |
| Electrical Endurance | 1,65 Mcycles 18 A AC-3 Ue'de <= 440 V; 1 Mcycles 32 A AC-1 Ue'de <= 440 V; 1,65 Mcycles 25 A AC-3e Ue'de <= 440 V |
| Control Circuit Type | DC standart |
| Coil Technology | Entegre bastırma cihazı ile |
| Control Circuit Voltage Limits | 0,1…0,25 Uc (-40…70 °C):düşme DC; 0,7…1,25 Uc (-40…60 °C):çalışma DC; 1…1.25 Uc (60…70 °C):çalışma DC |
| Hold-in Power Consumption (W) | 5,4 W @ 20 °C |
| Operating Time | 63 ±15 % ms kapama; 20 ±20 % ms açma |
| Maximum Operating Rate (cycles/h) | 3600 cyc/h at 60 °C |
| Auxiliary contact configuration | 1 NA + 1 NK |
| Auxiliary Contact Type | tip mekanik olarak bağlantılı 1 NA + 1 NK (IEC 60947-5-1); tip ayna kontak 1 NK (IEC 60947-4-1) |
| Minimum Switching Voltage | Sinyalleme devresi için 17 V |
| Minimum Switching Current | Sinyalleme devresi için 5 mA |
| Insulation Resistance | > 10 MOhm sinyalleme devresi için |
| Non-Overlap Time | 1,5 ms enerji kesmede NK ve NA kontağı arasında; 1,5 ms enerjilemede NK ve NA kontağı arasında |
| Mounting Support | Plaka; Ray |
| Certifications | UL; CCC; CSA; Denizcilik; UKCA; EAC; CB Şeması |
| IP Rating | IP20 ön yüz (IEC 60529) |
| Operating Altitude | 0–3000 m |
| Fire Resistance | 850 °C (IEC 60695-2-1) |
| Flame Retardancy Class | V1 (UL 94) |
| Height | 99 mm |
| Width | 45 mm |
| Depth | 101 mm |