Cable Cutting Tools Selection Guide: Technical Criteria & Application Standards
Cable Cutting Tools selection guide: technical parameters, mounting and compliance standards, and KSN, Gwest, Isıso comparison.
A cable cutter is a hand tool made with curved blades to cut cables with copper and aluminum conductors without crushing them or scattering the cores. It is used in panel building, cable pulling, power distribution and construction site work to cut cable to the desired length and to obtain a clean cut face before a lug or splice. The category includes Gwest and Isıso cutters, with cutting capacities such as 60 mm², 120 mm², 240 mm² and 500 mm² and models that can cut armored cable and steel-core aluminum conductor. Choose according to the conductor material, whether the cable is armored or steel-core, the largest cross-section or cable outer diameter to be cut, and the tool length. The cutting range is a value the manufacturer gives separately for each material; the capacity given for copper is not considered valid for steel-core conductor or steel braided wire. A cutter specified only for copper and aluminum does not replace a cutter made for cutting steel wire, steel rope or armored cable; for these materials you need models clearly stated in the product data. The Cable Cutting Tools category on Welibaba includes 21 active models from leading manufacturers such as KSN, Gwest, Isıso.
Key Technical Parameters for Selecting Cable Cutting Tools
To specify the right Cable Cutting Tools model for your panel or installation, verify the following parameters against your engineering schedule:
| Parameter | Typical Catalog Values | Verification Note |
|---|---|---|
| Cutting Range | 100 mm² Çelik Örgülü Tel / 600 mm² Alüminyum Çelik Özlü / Ø32 mm Çelik Özlü Kablo, 120 mm², 120 mm² Çelik Örgülü Tel / 800 mm² Alüminyum Çelik Özlü / Ø36 mm Çelik Özlü Kablo, 2.5–6 mm² | Verify against project schedule and load calculation |
| Manufacturer Order Code | 5040, 5041, 5042, 5067 | Verify against project schedule and load calculation |
| Area of Use | Bakır / Alüminyum, Bakır / Alüminyum / Zırhlı Kablo / Alüminyum Çelik Özlü | Verify against project schedule and load calculation |
| Manufacturer Product Code | CC-60, TC-100, TC-250S, TC-38 | Verify against project schedule and load calculation |
Installation, Compatibility, and Commissioning Checklist
- Electrical & Mechanical Matching: Confirm that rated voltage, current capacity, and mounting dimensions align with the upstream and downstream components in Hand Tools.
- Environmental & Enclosure Rating: Check IP protection class, housing material, and terminal capacity for dusty, humid, or high-vibration industrial environments.
- Related Product Groups: If your application calls for a different form factor or rating, compare sibling categories such as Allen Keys, Wrench Sets, Garden and Pruning Shears.
Frequently Asked Questions
What is the first parameter to check when selecting Cable Cutting Tools?
Start by confirming the circuit's rated electrical values and physical mounting dimensions, then use the technical attribute filters on the Cable Cutting Tools page to narrow down compatible series.
Which Cable Cutting Tools brands are available on Welibaba?
Welibaba currently stocks 21 active models in this category from manufacturers including KSN, Gwest, Isıso, complete with verified specifications and unit pricing.
How can I compare Cable Cutting Tools models by manufacturer part number?
You can search directly by manufacturer SKU/order code or use the category filter panel to compare equivalent models across brands side by side.