Crimping and Connection Pliers

A crimping pliers is a hand tool that permanently attaches a ferrule, lug, terminal or connector fitted over the end of a conductor to the conductor by crushing it with its die. It is used in panel wiring to ferrule stranded conductors, to lug power cables, to fit terminal and connector ends in control and electronic circuits, and to crimp RJ45 plugs onto data cables. In this category, ferrule, lug and connector / terminal crimping pliers are in separate subcategories; cable tie tools that tension the cable tie and battery jumper clamps fitted on the ends of jumper cables are also in this group. The names of Isıso, Konsan and Gwest products state crimping ranges such as 0.25-6 mm², 6-50 mm² and 25-35 mm². Choose the pliers first by the type of connection end you will crimp, then by the conductor cross-section, whether the end is insulated or non-insulated and the crimp profile of the die. Because each die is formed for a particular end type and cross-section range, a crimp made outside the range leaves a loose or over-crushed connection.

Products

How to choose Crimping and Connection Pliers

A crimping pliers is a hand tool that permanently attaches a ferrule, lug, terminal or connector fitted over the end of a conductor to the conductor by crushing it with its die. It is used in panel wiring to ferrule stranded conductors, to lug power cables, to fit terminal and connector ends in control and electronic circuits, and to crimp RJ45 plugs onto data cables.

  • Identify the measurement or fastening task and the required insulation safety rating.
  • Select jaw profile, cross-section range and accessories for the conductor or fastener standard.
  • Check CAT voltage category and replacement tip or die availability for field conditions.

Frequently asked questions

What is Crimping and Connection Pliers and where is it used?

A crimping pliers is a hand tool that permanently attaches a ferrule, lug, terminal or connector fitted over the end of a conductor to the conductor by crushing it with its die. It is used in panel wiring to ferrule stranded conductors, to lug power cables, to fit terminal and connector ends in control and electronic circuits, and to crimp RJ45 plugs onto data cables.

What should I compare when choosing Crimping and Connection Pliers?

Choose the pliers first by the type of connection end you will crimp, then by the conductor cross-section, whether the end is insulated or non-insulated and the crimp profile of the die.

Which product groups are available under Crimping and Connection Pliers?

The current subcategories include Battery Jumper Clamps, Connector / Terminal Crimping Pliers, Ferrule Crimping Pliers, Lug Crimping Pliers, Cable Tie Tools. Open a subcategory to compare its products and technical details.

Crimping and Connection Pliers Selection Guide: Technical Criteria and Engineering Practice