Side and End Cutters Selection Guide: Technical Criteria & Application Standards
Side and End Cutters selection guide: technical parameters, mounting and compliance standards, and İzeltaş comparison.
A side cutter is a wire-cutting pliers whose cutting edges run along the side of the jaw; on an end cutter, the cutting edges are at the end of the jaw, perpendicular to the handles. The side cutter is used in installation and panel work to cut conductors, wire and cable ties, while the end cutter is used for fine wires that must be cut close to the surface, such as component leads on an electronic board. In this category, İzeltaş sells 1000 V insulated electrician, Opak series and Kraft series side cutters in 140 mm, 160 mm and 180 mm lengths, along with a 125 mm electronics side cutter and a 125 mm electronics end cutter, per piece. Choose the cutter according to the cutting direction, length, handle type and the diameter and hardness of the wire you will cut: a long length needs less hand force on thick conductor, the 125 mm electronics types are for fine wire and tight spaces, and the 1000 V insulated electrician models are distinguished by their insulated handles. Verify the cutting capacity for hard steel wire from the manufacturer's data. A side cutter cuts conductors and thin cables, but does not replace a cable cutter, which cuts thick multi-core cable without crushing it. The Side and End Cutters category on Welibaba includes 11 active models from leading manufacturers such as İzeltaş.
Key Technical Parameters for Selecting Side and End Cutters
To specify the right Side and End Cutters model for your panel or installation, verify the following parameters against your engineering schedule:
| Parameter | Typical Catalog Values | Verification Note |
|---|---|---|
| Product Net Weight | 150 g, 155 g, 175 g, 200 g | Verify against project schedule and load calculation |
| Length | 125 mm, 140 mm (5 1/2"), 160 mm (6 1/4"), 180 mm (7 1/8") | Verify against project schedule and load calculation |
| Material | Özel alaşımlı çelik | Verify against project schedule and load calculation |
| Standards | TS 60, TS ISO 5749, DIN ISO 5749, TS 60 | Verify against project schedule and load calculation |
Installation, Compatibility, and Commissioning Checklist
- Electrical & Mechanical Matching: Confirm that rated voltage, current capacity, and mounting dimensions align with the upstream and downstream components in Pliers and Cutters.
- Environmental & Enclosure Rating: Check IP protection class, housing material, and terminal capacity for dusty, humid, or high-vibration industrial environments.
- Related Product Groups: If your application calls for a different form factor or rating, compare sibling categories such as Long-Nose Pliers, Combination Pliers, Circlip Pliers.
Frequently Asked Questions
What is the first parameter to check when selecting Side and End Cutters?
Start by confirming the circuit's rated electrical values and physical mounting dimensions, then use the technical attribute filters on the Side and End Cutters page to narrow down compatible series.
Which Side and End Cutters brands are available on Welibaba?
Welibaba currently stocks 11 active models in this category from manufacturers including İzeltaş, complete with verified specifications and unit pricing.
How can I compare Side and End Cutters models by manufacturer part number?
You can search directly by manufacturer SKU/order code or use the category filter panel to compare equivalent models across brands side by side.