Pincers
Pincers are pliers with two curved jaws that meet at sharp edges at the end, used to grip a nail by its head and pull it out, and to cut wire. They are used in carpentry and formwork stripping to pull nails, to twist and cut tie wire when tying rebar, and to remove staples on crates or packaging. In this category, İzeltaş sells a 180 mm pincers and a 280 mm heavy-duty concrete worker's pincers, per piece. Choose the pincers according to the job you will do, the length and the head width: a short length is comfortable for pulling nails, while the long-handled concrete worker's type offers a larger lever arm for tightening and cutting tie wire when tying rebar. When pulling a nail, the curved head rests on the surface and rolls, acting as a lever; for this reason head width and handle length directly affect the pulling force. For the diameter and hardness of the wire to be cut, refer to the manufacturer's data. Pincers must not be confused with the similarly shaped electronics end cutter: an end cutter is for cutting fine wire close to the surface and is not used as a nail-pulling lever.
Products
- İzeltaş Nippers 180mm — İzeltaş · SKU: 3800150180 · TRY 880.06 · In stock
- İzeltaş Heavy-Duty Concreter's Pliers 280mm — İzeltaş · SKU: 3835150280 · TRY 1,136.81 · In stock
How to choose Pincers
Pincers are pliers with two curved jaws that meet at sharp edges at the end, used to grip a nail by its head and pull it out, and to cut wire. They are used in carpentry and formwork stripping to pull nails, to twist and cut tie wire when tying rebar, and to remove staples on crates or packaging.
- Identify the measurement or fastening task and the required insulation safety rating.
- Select jaw profile, cross-section range and accessories for the conductor or fastener standard.
- Check CAT voltage category and replacement tip or die availability for field conditions.
Frequently asked questions
What is Pincers and where is it used?
Pincers are pliers with two curved jaws that meet at sharp edges at the end, used to grip a nail by its head and pull it out, and to cut wire. They are used in carpentry and formwork stripping to pull nails, to twist and cut tie wire when tying rebar, and to remove staples on crates or packaging.
What should I compare when choosing Pincers?
Choose the pincers according to the job you will do, the length and the head width: a short length is comfortable for pulling nails, while the long-handled concrete worker's type offers a larger lever arm for tightening and cutting tie wire when tying rebar.
Where can I find technical details for Pincers products?
Pincers must not be confused with the similarly shaped electronics end cutter: an end cutter is for cutting fine wire close to the surface and is not used as a nail-pulling lever.
Pliers and Cutters Selection Guide: Technical Criteria and Engineering Practice