Limit Switches

A limit switch is a position switch that changes contact position when a moving machine part touches the roller, plunger or lever on its actuator head, signaling to the control circuit that the movement has reached its limit. It is used to detect end of stroke, stop motion or reverse direction on conveyors, elevators, cranes, automatic doors and machine tools. The category includes EMAS limit switches, ABB LS series limit switches, and Isıso TLS and Gwest GLS series limit switches; there are types with metal or plastic housings, roller, adjustable lever, plunger and heads with a blunt end, and 1NO+1NC and 2NO+2NC contacts, as well as crane switches. Select the limit switch by the type of actuator head and the direction from which the object approaches, housing material, contact arrangement, whether it is snap-action or slow-action, and the IP rating the environment requires. A limit switch works by contact and is not an inductive sensor that detects an object without touching it; it needs mechanical force for actuation but does not need a supply voltage.

Products

How to choose Limit Switches

A limit switch is a position switch that changes contact position when a moving machine part touches the roller, plunger or lever on its actuator head, signaling to the control circuit that the movement has reached its limit. It is used to detect end of stroke, stop motion or reverse direction on conveyors, elevators, cranes, automatic doors and machine tools.

  • Separate sensing, motion control, logic processing and operator interface requirements.
  • Select signal type, supply voltage, communication protocol and I/O count for the machine network.
  • Verify housing size, sensing distance and PNP/NPN output polarity against the PLC input card.

Frequently asked questions

What is Limit Switches and where is it used?

A limit switch is a position switch that changes contact position when a moving machine part touches the roller, plunger or lever on its actuator head, signaling to the control circuit that the movement has reached its limit. It is used to detect end of stroke, stop motion or reverse direction on conveyors, elevators, cranes, automatic doors and machine tools.

What should I compare when choosing Limit Switches?

Select the limit switch by the type of actuator head and the direction from which the object approaches, housing material, contact arrangement, whether it is snap-action or slow-action, and the IP rating the environment requires.

Where can I find technical details for Limit Switches products?

A limit switch works by contact and is not an inductive sensor that detects an object without touching it; it needs mechanical force for actuation but does not need a supply voltage.

Limit Switches Selection Guide