Stack Lights and Warning Lights

Illuminated columns and beacons are signaling devices that report the operating, standby and fault status of a machine or line with colored light visible from a distance and, if desired, with sound. Multi-tier types, also called stack lights, are used on production lines to inform the operator of the status, while single-color top lights and horns are used for warnings on cranes, automatic doors and vehicle crossings. The category lists two-, three-, four- and five-tier LED columns, steady and flashing column elements, LED top lights, rotating beacons, horns with buzzers and mounting feet; the products are Siemens, EMAS, Schneider Electric and Isıso brands. Choose the product according to the control voltage (for example 24 V AC/DC or 220 V AC), the number of tiers and color sequence, the need for a buzzer, the housing diameter and the IP rating suited to the environment. In modular series, the light element, connection element, tube and base are separate products; the housing diameters (such as 50 mm or 70 mm) must match each other. Columns and top lights are meant to be seen from a distance; do not confuse them with pilot lights that fit into the 22 mm hole in a panel door.

Products

How to choose Stack Lights and Warning Lights

Illuminated columns and beacons are signaling devices that report the operating, standby and fault status of a machine or line with colored light visible from a distance and, if desired, with sound. Multi-tier types, also called stack lights, are used on production lines to inform the operator of the status, while single-color top lights and horns are used for warnings on cranes, automatic doors and vehicle crossings.

  • Separate sensing, motion control, logic processing and operator interface requirements.
  • Select signal type, supply voltage, communication protocol and I/O count for the machine network.
  • Verify housing size, sensing distance and PNP/NPN output polarity against the PLC input card.

Frequently asked questions

What is Stack Lights and Warning Lights and where is it used?

Illuminated columns and beacons are signaling devices that report the operating, standby and fault status of a machine or line with colored light visible from a distance and, if desired, with sound. Multi-tier types, also called stack lights, are used on production lines to inform the operator of the status, while single-color top lights and horns are used for warnings on cranes, automatic doors and vehicle crossings.

What should I compare when choosing Stack Lights and Warning Lights?

Choose the product according to the control voltage (for example 24 V AC/DC or 220 V AC), the number of tiers and color sequence, the need for a buzzer, the housing diameter and the IP rating suited to the environment.

Where can I find technical details for Stack Lights and Warning Lights products?

Columns and top lights are meant to be seen from a distance; do not confuse them with pilot lights that fit into the 22 mm hole in a panel door.

Stack Lights and Warning Lights Selection Guide: Technical Criteria and Engineering Practice