Power Supplies with Terminal Connectors

Power supplies with terminal connectors are switch-mode power supplies in metal cases, fixed to the mounting surface (panel-mounted), whose input and output cables connect to a terminal block on the housing. They are used inside machines and devices or on the panel mounting plate to supply automation components, electronic boards and general DC loads. The products in this category are the Delta Electronics PMT series: they are fed from a single-phase AC mains, provide 12 V, 24 V and 48 V DC output, and are listed in ratings such as 35 W, 50 W, 75 W, 100 W, 150 W, 200 W and 350 W. Select the output voltage according to the load to be supplied, the power and output current according to the total current of the load, and the housing size according to the mounting location. The product data gives the input as 90-264 V AC; according to the manufacturer's data, on some models of the series the input range is set with a switch on the housing, so verify the switch position before energizing. A power supply with terminal connectors is screwed to the mounting surface; it should not be confused with a DIN rail power supply that clips directly onto the DIN rail.

Products

How to choose Power Supplies with Terminal Connectors

Power supplies with terminal connectors are switch-mode power supplies in metal cases, fixed to the mounting surface (panel-mounted), whose input and output cables connect to a terminal block on the housing. They are used inside machines and devices or on the panel mounting plate to supply automation components, electronic boards and general DC loads.

  • Separate sensing, motion control, logic processing and operator interface requirements.
  • Select signal type, supply voltage, communication protocol and I/O count for the machine network.
  • Verify housing size, sensing distance and PNP/NPN output polarity against the PLC input card.

Frequently asked questions

What is Power Supplies with Terminal Connectors and where is it used?

Power supplies with terminal connectors are switch-mode power supplies in metal cases, fixed to the mounting surface (panel-mounted), whose input and output cables connect to a terminal block on the housing. They are used inside machines and devices or on the panel mounting plate to supply automation components, electronic boards and general DC loads.

What should I compare when choosing Power Supplies with Terminal Connectors?

Select the output voltage according to the load to be supplied, the power and output current according to the total current of the load, and the housing size according to the mounting location.

Where can I find technical details for Power Supplies with Terminal Connectors products?

A power supply with terminal connectors is screwed to the mounting surface; it should not be confused with a DIN rail power supply that clips directly onto the DIN rail.

Power Supplies with Terminal Connectors Selection Guide: Technical Criteria & Application Standards