Cable Clips

A clip (cable clip) is a small fastener that attaches a cable or spiral conduit to a wall, ceiling or enclosure surface. It is used to carry cable along a neat line in surface-mounted installations and to keep cable bundles tidy inside enclosures and machines. Concrete nail, anchor, screw and adhesive clips are in the subcategories, while Ortaç's gray and black covered polyamide clips for spiral conduit are listed directly on this page; Gwest, Konsan and Mutlusan are among the other brands. First choose the fixing method by the mounting surface: the nail type, installed by hammering, is for concrete and plastered walls, the screw type for sheet metal and wood, and the adhesive type for flat surfaces that should not be drilled; then determine the size that matches the outer diameter of the cable or conduit. For nail clips the size is expressed by a number, and for adhesive and screw clips by the base size (for example 19x19 mm or 23x16 mm). The product names of Ortaç covered clips state the box contents of 10, 25 or 50 pieces.

Products

How to choose Cable Clips

A clip (cable clip) is a small fastener that attaches a cable or spiral conduit to a wall, ceiling or enclosure surface. It is used to carry cable along a neat line in surface-mounted installations and to keep cable bundles tidy inside enclosures and machines.

  • Clarify whether the task is connection, cable routing, enclosure distribution or termination.
  • Match dimensions, thread standard, conductor cross-section and IP rating with the cable and panel.
  • Choose housing material and pack quantity according to the mounting environment.

Frequently asked questions

What is Cable Clips and where is it used?

A clip (cable clip) is a small fastener that attaches a cable or spiral conduit to a wall, ceiling or enclosure surface. It is used to carry cable along a neat line in surface-mounted installations and to keep cable bundles tidy inside enclosures and machines.

What should I compare when choosing Cable Clips?

First choose the fixing method by the mounting surface: the nail type, installed by hammering, is for concrete and plastered walls, the screw type for sheet metal and wood, and the adhesive type for flat surfaces that should not be drilled; then determine the size that matches the outer diameter of the cable or conduit.

Which product groups are available under Cable Clips?

The current subcategories include Adhesive Clips, Clips with Anchor, Concrete Nail Clips, Screw Clips. Open a subcategory to compare its products and technical details.

Cable Clips Selection Guide: Technical Criteria and Engineering Practice