Standard Heat-Shrink Sleeves
A standard heat-shrink sleeve is a thin-wall polyolefin insulating covering with no adhesive inside, which mostly shrinks at a 2:1 ratio when heated. It is used in panel and machine wiring to insulate lug necks and solder points and to mark conductors with phase colors. In this category, Woer and Isıso sleeves in nominal sizes such as 4.8 mm, 6.4 mm, 16 mm and 20 mm are available in colors such as black, white, yellow-green, red and blue, and Gwest GWBT busbar insulation sleeves in sizes such as 25/10 mm and 100/40 mm. Choose the sleeve so that the inner diameter before shrinking passes comfortably over the piece, the shrunk diameter wraps tightly around the conductor, and according to operating temperature, voltage rating and color. For products with listed technical values, the material is polyolefin and the operating temperature is -55 to +125 °C; the voltage is given as 600 V for Woer sleeves and 36 kV for Gwest busbar insulation sleeves. The standard type does not make a waterproof seal; for splices exposed to moisture it does not replace an adhesive-lined heat-shrink sleeve.
Products
- Isıso IDM-YEŞİL 25.4 MM Heat-Shrink Sleeve, 25.4 mm, Green — Isıso · SKU: IDM-YEŞİL 25.4 MM · TRY 30.59 · In stock
- Isıso IDM-YEŞİL 51 MM Heat-Shrink Sleeve, 51 mm, Green — Isıso · SKU: IDM-YEŞİL 51 MM · TRY 67.58 · In stock
- Isıso IDM-WHITE 60 MM Heat-Shrink Sleeve, 60 mm, White — Isıso · SKU: IDM-BEYAZ 60 MM · TRY 101.89 · In stock
- Isıso IDM-GRİ 2.5 MM Heat-Shrink Sleeve, 2.5 mm, Gray — Isıso · SKU: IDM-GRİ 2.5 MM · TRY 2.83 · In stock
- Isıso IDM-GRİ 4.8 MM Heat-Shrink Sleeve, 4.8 mm, Gray — Isıso · SKU: IDM-GRİ 4.8 MM · TRY 5.36 · In stock
- Isıso IDM-KIRMIZI 2.5 MM Heat-Shrink Sleeve, 2.5 mm, Red — Isıso · SKU: IDM-KIRMIZI 2.5 MM · TRY 2.73 · In stock
- Isıso IDM-MAVİ 20 MM Heat-Shrink Sleeve, 20 mm, Blue — Isıso · SKU: IDM-MAVİ 20 MM · TRY 24.13 · In stock
- Isıso IDM-YEŞİL 2.5 MM Heat-Shrink Sleeve, 2.5 mm, Green — Isıso · SKU: IDM-YEŞİL 2.5 MM · TRY 2.73 · In stock
- Isıso IDM-SY 25 MM Heat-Shrink Sleeve, 25 mm, Yellow-green — Isıso · SKU: IDM-SY 25 MM · TRY 44.24 · In stock
- Isıso IDM-SY 35 MM Heat-Shrink Sleeve, 35 mm, Yellow-green — Isıso · SKU: IDM-SY 35 MM · TRY 80.44 · In stock
- Isıso IDM-SY 40 MM Heat-Shrink Sleeve, 40 mm, Yellow-green — Isıso · SKU: IDM-SY 40 MM · TRY 80.44 · In stock
- Isıso IDM-YEŞİL 20 MM Heat-Shrink Sleeve, 20 mm, Green — Isıso · SKU: IDM-YEŞİL 20 MM · TRY 24.13 · In stock
- Isıso IDM-KAHVE 38 MM Heat-Shrink Sleeve, 38 mm, Brown — Isıso · SKU: IDM-KAHVE 38 MM · TRY 57.90 · In stock
- Isıso IDM-KIRMIZI 9.5 MM Heat-Shrink Sleeve, 9.5 mm, Red — Isıso · SKU: IDM-KIRMIZI 9.5 MM · TRY 6.26 · In stock
- Isıso IDM-SARI 13 MM Heat-Shrink Sleeve, 13 mm, Yellow — Isıso · SKU: IDM-SARI 13 MM · TRY 8.84 · In stock
- Isıso IDM-GRİ 38 MM Heat-Shrink Sleeve, 38 mm, Gray — Isıso · SKU: IDM-GRİ 38 MM · TRY 57.90 · In stock
- Isıso IDM-MAVİ 80 MM Heat-Shrink Sleeve, 80 mm, Blue — Isıso · SKU: IDM-MAVİ 80 MM · TRY 128.70 · In stock
- Isıso IDM-SY 8 MM Heat-Shrink Sleeve, 8 mm, Yellow-green — Isıso · SKU: IDM-SY 8 MM · TRY 10.97 · In stock
- Isıso IDM-KAHVE 6.4 MM Heat-Shrink Sleeve, 6.4 mm, Brown — Isıso · SKU: IDM-KAHVE 6.4 MM · TRY 5.36 · In stock
- Isıso IDM-MAVİ 60 MM Heat-Shrink Sleeve, 60 mm, Blue — Isıso · SKU: IDM-MAVİ 60 MM · TRY 101.89 · In stock
- Isıso IDM-SARI 6.4 MM Heat-Shrink Sleeve, 6.4 mm, Yellow — Isıso · SKU: IDM-SARI 6.4 MM · TRY 5.31 · In stock
- Isıso IDM-KIRMIZI 60 MM Heat-Shrink Sleeve, 60 mm, Red — Isıso · SKU: IDM-KIRMIZI 60 MM · TRY 101.89 · In stock
- Isıso IDM-MAVİ 3.2 MM Heat-Shrink Sleeve, 3.2 mm, Blue — Isıso · SKU: IDM-MAVİ 3.2 MM · TRY 3.23 · In stock
- Isıso IDM-SİYAH 50 MM Heat-Shrink Sleeve, 50 mm, Black — Isıso · SKU: IDM-SİYAH 50 MM · TRY 61.67 · In stock
- Isıso IDM-KAHVE 9.5 MM Heat-Shrink Sleeve, 9.5 mm, Brown — Isıso · SKU: IDM-KAHVE 9.5 MM · TRY 7.65 · In stock
How to choose Standard Heat-Shrink Sleeves
A standard heat-shrink sleeve is a thin-wall polyolefin insulating covering with no adhesive inside, which mostly shrinks at a 2:1 ratio when heated. It is used in panel and machine wiring to insulate lug necks and solder points and to mark conductors with phase colors.
- Clarify whether the task is connection, cable routing, enclosure distribution or termination.
- Match dimensions, thread standard, conductor cross-section and IP rating with the cable and panel.
- Choose housing material and pack quantity according to the mounting environment.
Frequently asked questions
What is Standard Heat-Shrink Sleeves and where is it used?
A standard heat-shrink sleeve is a thin-wall polyolefin insulating covering with no adhesive inside, which mostly shrinks at a 2:1 ratio when heated. It is used in panel and machine wiring to insulate lug necks and solder points and to mark conductors with phase colors.
What should I compare when choosing Standard Heat-Shrink Sleeves?
Choose the sleeve so that the inner diameter before shrinking passes comfortably over the piece, the shrunk diameter wraps tightly around the conductor, and according to operating temperature, voltage rating and color.
Where can I find technical details for Standard Heat-Shrink Sleeves products?
The standard type does not make a waterproof seal; for splices exposed to moisture it does not replace an adhesive-lined heat-shrink sleeve.