Lighting Tracks and Connectors

A lighting track is a carrier profile that lets track spots be fitted at any desired point along the line and powered from the conductors inside; connection parts feed the track, join it end to end and change the direction of the line. It is used in shops, showrooms and offices to rearrange luminaires without changing the installation. The category lists ACK and Cata brand single-phase, three-phase and 48 V magnetic tracks and ACK's 48 V Rétro series tracks in lengths of 1 m, 2 m and 3 m and in colors such as black, white and copper; feed, joint and corner parts are also here. Choose the track first by system type (single-phase, three-phase or 48 V magnetic), then by line length, body color and the adapter type of the luminaires. On a single-phase track the luminaires are powered from one circuit, while on a three-phase track they can be distributed across three circuits and switched group by group. 48 V tracks are not connected directly to the mains and are powered by a track transformer with 48 V output. Single-phase, three-phase and magnetic tracks do not replace each other; their profiles and adapters are different, and the luminaire or connection part of one system does not fit another.

Products

How to choose Lighting Tracks and Connectors

A lighting track is a carrier profile that lets track spots be fitted at any desired point along the line and powered from the conductors inside; connection parts feed the track, join it end to end and change the direction of the line. It is used in shops, showrooms and offices to rearrange luminaires without changing the installation.

  • Define the space, ceiling height and mounting method before selecting a luminaire.
  • Match luminous flux, color temperature and glare control to the task and room layout.
  • Verify IP ingress protection, driver compatibility and emergency lighting requirements.

Frequently asked questions

What is Lighting Tracks and Connectors and where is it used?

A lighting track is a carrier profile that lets track spots be fitted at any desired point along the line and powered from the conductors inside; connection parts feed the track, join it end to end and change the direction of the line. It is used in shops, showrooms and offices to rearrange luminaires without changing the installation.

What should I compare when choosing Lighting Tracks and Connectors?

Choose the track first by system type (single-phase, three-phase or 48 V magnetic), then by line length, body color and the adapter type of the luminaires.

Where can I find technical details for Lighting Tracks and Connectors products?

48 V tracks are not connected directly to the mains and are powered by a track transformer with 48 V output.

Lighting Tracks and Connectors Selection Guide: Technical Criteria and Engineering Practice