EMC Type Grounded Nickel-Plated Brass Glands Selection Guide: Technical Criteria & Application Standards
EMC Type Grounded Nickel-Plated Brass Glands selection guide: technical parameters, mounting and compliance standards, and Ortaç comparison.
An EMC-type earthed gland is a nickel-plated brass cable gland that grips the braided shield of a shielded cable all the way around with a conductive contact part in its body and connects it to the panel housing. It is used in entries where the shield must be connected to the metal enclosure over a wide surface to reduce electromagnetic interference, such as shielded power cables between a motor drive and a motor, and servo and signal cables. Ortaç-brand products are listed in metric threads such as M 12, M 16, M 25, M 40 and PG threads such as PG 7, PG 16, PG 29, PG 48. Choose the EMC gland according to thread type and size, the clamping range matching the cable outer sheath diameter and the shield braid diameter, and the required IP rating. The effectiveness of the shield connection depends on conductive contact between the gland body and the panel; on painted surfaces, follow the manufacturer's mounting instructions. A standard brass gland has no contact part that grips the shield, so it does not replace an EMC-type gland. The EMC Type Grounded Nickel-Plated Brass Glands category on Welibaba includes 18 active models from leading manufacturers such as Ortaç.
Key Technical Parameters for Selecting EMC Type Grounded Nickel-Plated Brass Glands
To specify the right EMC Type Grounded Nickel-Plated Brass Glands model for your panel or installation, verify the following parameters against your engineering schedule:
| Parameter | Typical Catalog Values | Verification Note |
|---|---|---|
| Thread Size | M 12 x 1, 5, M 16 x 1, 5 | Verify against project schedule and load calculation |
| Seal Material | TPV | Verify against project schedule and load calculation |
| Connection Thread | Metrik (EN 60423), PG (DIN 40430) | Verify against project schedule and load calculation |
| EMC Spring Material | AISI301 | Verify against project schedule and load calculation |
Installation, Compatibility, and Commissioning Checklist
- Electrical & Mechanical Matching: Confirm that rated voltage, current capacity, and mounting dimensions align with the upstream and downstream components in Cable Glands.
- Environmental & Enclosure Rating: Check IP protection class, housing material, and terminal capacity for dusty, humid, or high-vibration industrial environments.
- Related Product Groups: If your application calls for a different form factor or rating, compare sibling categories such as Straight Type Glands, Sealed Type Glands with Reducer, Euro-Metric Sealed Type Glands.
Frequently Asked Questions
What is the first parameter to check when selecting EMC Type Grounded Nickel-Plated Brass Glands?
Start by confirming the circuit's rated electrical values and physical mounting dimensions, then use the technical attribute filters on the EMC Type Grounded Nickel-Plated Brass Glands page to narrow down compatible series.
Which EMC Type Grounded Nickel-Plated Brass Glands brands are available on Welibaba?
Welibaba currently stocks 18 active models in this category from manufacturers including Ortaç, complete with verified specifications and unit pricing.
How can I compare EMC Type Grounded Nickel-Plated Brass Glands models by manufacturer part number?
You can search directly by manufacturer SKU/order code or use the category filter panel to compare equivalent models across brands side by side.