Non-Insulated Cable Terminals

A non-insulated cable end terminal is a metal cable end with no plastic sleeve over it, crimped directly onto the conductor and connected under a screw with a ring or fork mouth. It is used in panel, machine and in-device connections where a plastic sleeve is not required or where the connection will be insulated afterward with a heat-shrink sleeve. In this category, Isıso RNB series ring-type and SNB series fork-type non-insulated ends are available in 0.5-1.5 mm², 1.5-2.5 mm² and 4-6 mm² cross-section ranges, in bolt sizes such as M3, M4, M5, M6 and M8. Choose the mouth shape (ring or fork) according to the connection point, the hole size according to the bolt, and the barrel size according to the conductor cross-section. Because the crimp zone stays bare, a non-insulated end does not replace an insulated cable end in connections that sit side by side and need insulation between them, unless an additional insulation sleeve is used.

Products

How to choose Non-Insulated Cable Terminals

A non-insulated cable end terminal is a metal cable end with no plastic sleeve over it, crimped directly onto the conductor and connected under a screw with a ring or fork mouth. It is used in panel, machine and in-device connections where a plastic sleeve is not required or where the connection will be insulated afterward with a heat-shrink sleeve.

  • Clarify whether the task is connection, cable routing, enclosure distribution or termination.
  • Match dimensions, thread standard, conductor cross-section and IP rating with the cable and panel.
  • Choose housing material and pack quantity according to the mounting environment.

Frequently asked questions

What is Non-Insulated Cable Terminals and where is it used?

A non-insulated cable end terminal is a metal cable end with no plastic sleeve over it, crimped directly onto the conductor and connected under a screw with a ring or fork mouth. It is used in panel, machine and in-device connections where a plastic sleeve is not required or where the connection will be insulated afterward with a heat-shrink sleeve.

What should I compare when choosing Non-Insulated Cable Terminals?

Choose the mouth shape (ring or fork) according to the connection point, the hole size according to the bolt, and the barrel size according to the conductor cross-section.

Where can I find technical details for Non-Insulated Cable Terminals products?

It is used in panel, machine and in-device connections where a plastic sleeve is not required or where the connection will be insulated afterward with a heat-shrink sleeve.

Non-Insulated Cable Terminals Selection Guide: Technical Criteria & Application Standards