Metal Trunking Covers

Metal trunking covers are galvanized sheet metal lids that cover sheet metal cable trunking and formed parts such as bends, T and four-way connectors, protecting cables from dust, falling objects and mechanical impact. They are used to close the trunking run in production areas where cables must not be left exposed, in dusty environments and on outdoor routes. This category includes UKS straight cable trunking covers and horizontal bend, T connector and four-way bend covers in widths such as 50, 150, 500 and 600 mm, sheet thicknesses such as 1.0 mm, 1.5 mm and 2.0 mm, with pre-galvanized and hot-dip coatings; the cover clamps that fasten the cover to the trunking are also in this group. Choose the cover according to the width of the trunking or formed part it will cover, the part type (straight, bend, T or four-way), the sheet thickness and the coating, and choose the clamp according to the trunking height. Straight trunking covers are sold per meter; bend and connector covers are sold per piece. A straight trunking cover does not replace the covers for formed parts (bends, T and four-way connectors); each part needs its own cover.

Products

How to choose Metal Trunking Covers

Metal trunking covers are galvanized sheet metal lids that cover sheet metal cable trunking and formed parts such as bends, T and four-way connectors, protecting cables from dust, falling objects and mechanical impact. They are used to close the trunking run in production areas where cables must not be left exposed, in dusty environments and on outdoor routes.

  • Clarify whether the task is connection, cable routing, enclosure distribution or termination.
  • Match dimensions, thread standard, conductor cross-section and IP rating with the cable and panel.
  • Choose housing material and pack quantity according to the mounting environment.

Frequently asked questions

What is Metal Trunking Covers and where is it used?

Metal trunking covers are galvanized sheet metal lids that cover sheet metal cable trunking and formed parts such as bends, T and four-way connectors, protecting cables from dust, falling objects and mechanical impact. They are used to close the trunking run in production areas where cables must not be left exposed, in dusty environments and on outdoor routes.

What should I compare when choosing Metal Trunking Covers?

Choose the cover according to the width of the trunking or formed part it will cover, the part type (straight, bend, T or four-way), the sheet thickness and the coating, and choose the clamp according to the trunking height.

Where can I find technical details for Metal Trunking Covers products?

They are used to close the trunking run in production areas where cables must not be left exposed, in dusty environments and on outdoor routes.

Metal Trunking Covers Selection Guide: Technical Criteria and Engineering Practice