Arc Welding Plugs and Sockets
Arc welding plugs and sockets are single-pole connection elements made for high current that provide a detachable connection between the output of a welding machine and the welding cable, or between two welding cables. They are used to connect electrode holder and ground clamp cables to the machine, to extend welding cables, and to plug and unplug cables quickly in workshops and on construction sites. In this category, a Bemis rubber-housing series is offered in 200 A and 400 A rated currents as a plug, extension socket and machine socket, with IP55 protection rating and MS 58 brass contacts. First choose the rated current that suits the welding machine's output current, then the model that suits the cross-section of the welding cable; the 200 A types are defined by the 16/95 mm² cable cross-section group and the 400 A types by the 50/150 mm² group. These products are for the welding current circuit and cannot replace the CEE standard plugs and sockets used on the machine's mains supply.
Products
- Bemis BK4-7501-2410 Rubber 16/95mm2 200A. Machine Socket IP55 — Bemis · SKU: BK4-7501-2410 · TRY 391.04 · In stock
- Bemis BK4-9501-2010 Rubber 50/150mm2 400A. Plug IP55 — Bemis · SKU: BK4-9501-2010 · TRY 336.05 · In stock
- Bemis BK4-9501-2310 Rubber 50/150mm2 400A. Extension Socket IP55 — Bemis · SKU: BK4-9501-2310 · TRY 375.53 · In stock
- Bemis BK4-7501-2010 Rubber 16/95mm2 200A. Plug IP55 — Bemis · SKU: BK4-7501-2010 · TRY 296.57 · In stock
- Bemis BK4-9501-2410 Rubber 50/150mm2 400A. Machine Socket IP55 — Bemis · SKU: BK4-9501-2410 · TRY 434.75 · In stock
- Bemis BK4-7501-2310 Rubber 16/95mm2 200A. Extension Socket IP55 — Bemis · SKU: BK4-7501-2310 · TRY 304.56 · In stock
How to choose Arc Welding Plugs and Sockets
Arc welding plugs and sockets are single-pole connection elements made for high current that provide a detachable connection between the output of a welding machine and the welding cable, or between two welding cables. They are used to connect electrode holder and ground clamp cables to the machine, to extend welding cables, and to plug and unplug cables quickly in workshops and on construction sites.
- Clarify whether the task is connection, cable routing, enclosure distribution or termination.
- Match dimensions, thread standard, conductor cross-section and IP rating with the cable and panel.
- Choose housing material and pack quantity according to the mounting environment.
Frequently asked questions
What is Arc Welding Plugs and Sockets and where is it used?
Arc welding plugs and sockets are single-pole connection elements made for high current that provide a detachable connection between the output of a welding machine and the welding cable, or between two welding cables. They are used to connect electrode holder and ground clamp cables to the machine, to extend welding cables, and to plug and unplug cables quickly in workshops and on construction sites.
What should I compare when choosing Arc Welding Plugs and Sockets?
First choose the rated current that suits the welding machine's output current, then the model that suits the cross-section of the welding cable; the 200 A types are defined by the 16/95 mm² cable cross-section group and the 400 A types by the 50/150 mm² group.
Where can I find technical details for Arc Welding Plugs and Sockets products?
These products are for the welding current circuit and cannot replace the CEE standard plugs and sockets used on the machine's mains supply.