Surface-Mounted Junction Boxes with Glands and Plugs
A surface-mounted gland-and-plug junction box is a small ABS connection box with an opaque cover, mounted on the surface, whose cable entries on the side faces come closed with stepped conical plugs. It is used at surface-mounted splice points of lighting, socket and small motor lines, where the cable is to be taken into the box by passing it through the plug without fitting a separate gland. In this category, the opaque ABS models of the Çetinkaya Pano brand are sold per piece, at 80x80x40 mm with IP44 and 80x120x50 mm with IP54 protection rating; the manufacturer lists these two sizes as the small sizes of the plugged junction box series. Choose the size by the number of conductors to be spliced and the terminal block volume, and the IP rating by the humidity and dust conditions of the mounting location; verify from the manufacturer drawing that the plugs suit the outer diameter of the cable you will use. A gland-and-plug junction box should not be confused with a knock-out opaque junction box of the same sizes: in a knock-out housing the cable entry does not come ready with a plug, and the entry point is opened by breaking it out.
Products
- Çetinkaya 80x80x40 Surface-Mounted Opaque ABS Junction Box with Glands and Plugs ÇP 1038 — Çetinkaya Pano · SKU: ÇP 1038 · TRY 41.40 · In stock
- Çetinkaya 80x120x50 Surface-Mounted Opaque ABS Junction Box with Glands and Plugs ÇP 1039 — Çetinkaya Pano · SKU: ÇP 1039 · TRY 54.90 · In stock
How to choose Surface-Mounted Junction Boxes with Glands and Plugs
A surface-mounted gland-and-plug junction box is a small ABS connection box with an opaque cover, mounted on the surface, whose cable entries on the side faces come closed with stepped conical plugs. It is used at surface-mounted splice points of lighting, socket and small motor lines, where the cable is to be taken into the box by passing it through the plug without fitting a separate gland.
- Clarify whether the task is connection, cable routing, enclosure distribution or termination.
- Match dimensions, thread standard, conductor cross-section and IP rating with the cable and panel.
- Choose housing material and pack quantity according to the mounting environment.
Frequently asked questions
What is Surface-Mounted Junction Boxes with Glands and Plugs and where is it used?
A surface-mounted gland-and-plug junction box is a small ABS connection box with an opaque cover, mounted on the surface, whose cable entries on the side faces come closed with stepped conical plugs. It is used at surface-mounted splice points of lighting, socket and small motor lines, where the cable is to be taken into the box by passing it through the plug without fitting a separate gland.
What should I compare when choosing Surface-Mounted Junction Boxes with Glands and Plugs?
Choose the size by the number of conductors to be spliced and the terminal block volume, and the IP rating by the humidity and dust conditions of the mounting location; verify from the manufacturer drawing that the plugs suit the outer diameter of the cable you will use.
Where can I find technical details for Surface-Mounted Junction Boxes with Glands and Plugs products?
A gland-and-plug junction box should not be confused with a knock-out opaque junction box of the same sizes: in a knock-out housing the cable entry does not come ready with a plug, and the entry point is opened by breaking it out.