Surface-Mounted Junction Boxes with Plugs

A surface-mounted plugged junction box is an ABS connection box, mounted on the surface, whose cable entry points on the side faces come closed with conical plugs. Because the cable is taken into the box by passing it through the plug, it is used at splice points of surface-mounted lighting, socket and distribution lines where quick installation without fitting a separate gland for each entry is wanted. In this category, Çetinkaya Pano plugged ABS junction boxes are sold in sizes such as 100x100x50 mm, 110x110x70 mm, 150x110x70 mm, 190x145x80 mm, 250x200x90 mm and 310x230x130 mm, in IP54 and IP65 protection ratings. Choose the box size by the number of splices and terminal block volume, the plug count by the number of incoming and outgoing cables, and the IP rating by the environmental conditions; see the manufacturer drawing for the plug count and the cable diameter suited to the plug. A plugged junction box should not be confused with a knock-out junction box: in a knock-out housing the entry point is opened by breaking it out, and a gland or plug is fitted separately to the opened hole.

Products

How to choose Surface-Mounted Junction Boxes with Plugs

A surface-mounted plugged junction box is an ABS connection box, mounted on the surface, whose cable entry points on the side faces come closed with conical plugs. Because the cable is taken into the box by passing it through the plug, it is used at splice points of surface-mounted lighting, socket and distribution lines where quick installation without fitting a separate gland for each entry is wanted.

  • Clarify whether the task is connection, cable routing, enclosure distribution or termination.
  • Match dimensions, thread standard, conductor cross-section and IP rating with the cable and panel.
  • Choose housing material and pack quantity according to the mounting environment.

Frequently asked questions

What is Surface-Mounted Junction Boxes with Plugs and where is it used?

A surface-mounted plugged junction box is an ABS connection box, mounted on the surface, whose cable entry points on the side faces come closed with conical plugs. Because the cable is taken into the box by passing it through the plug, it is used at splice points of surface-mounted lighting, socket and distribution lines where quick installation without fitting a separate gland for each entry is wanted.

What should I compare when choosing Surface-Mounted Junction Boxes with Plugs?

Choose the box size by the number of splices and terminal block volume, the plug count by the number of incoming and outgoing cables, and the IP rating by the environmental conditions; see the manufacturer drawing for the plug count and the cable diameter suited to the plug.

Where can I find technical details for Surface-Mounted Junction Boxes with Plugs products?

A plugged junction box should not be confused with a knock-out junction box: in a knock-out housing the entry point is opened by breaking it out, and a gland or plug is fitted separately to the opened hole.

Junction Box Enclosures Selection Guide