Screwdrivers
A screwdriver is a handled hand tool whose end profile seats in the recess of a screw head to tighten and loosen the screw. It is used on every screwed connection, from panel and terminal block connections to switch, socket and luminaire installation and device repair; electronics-type slim-shaft models are meant for reaching small terminal block screws and narrow recesses. This category includes İzeltaş screwdriver sets in the Kraft and Opak series with 6, 7 and 8 pieces of slotted and Phillips bits, an electronics-type terminal block screwdriver set, a set with Torx bits and a set with interchangeable bits. Choose a set by the head profile of the screws you work with (slotted, Phillips, Torx), the bit width and number, the shaft length and the handle design. The bit must fill the screw recess fully; a bit that is too small strips the recess, and one that is too large will not seat. In a set with interchangeable bits, different bits are fitted to a single handle, whereas in fixed-bit sets each screwdriver is intended for one profile and size. A screwdriver whose product page does not state 1000 V insulation is not a substitute for an insulated screwdriver made for live working.
Products
- İzeltaş Kraft Series Flat-Head Screwdriver Set 8-Piece — İzeltaş · SKU: 4100008108 · TRY 1,469.40 · In stock
- İzeltaş Kraft Series Phillips Screwdriver Set 6-Piece — İzeltaş · SKU: 4120008106 · TRY 1,317.72 · In stock
- İzeltaş Electronics Terminal Block Screwdriver Set 6 Pieces — İzeltaş · SKU: 4500008106 · TRY 996.19 · In stock
- İzeltaş Interchangeable Bit Screwdriver Set (7 Pieces) — İzeltaş · SKU: 4815006107 · TRY 521.40 · In stock
- İzeltaş Kraft Series Screwdriver Set 7-Piece — İzeltaş · SKU: 4100008107 · TRY 1,303.50 · In stock
- İzeltaş Electronics-Type Terminal Torx Screwdriver Set 6 Pieces — İzeltaş · SKU: 4530001006 · TRY 910.08 · In stock
- İzeltaş Opak Series Screwdriver Set 7 Pieces — İzeltaş · SKU: 4300008107 · TRY 1,166.83 · In stock
How to choose Screwdrivers
A screwdriver is a handled hand tool whose end profile seats in the recess of a screw head to tighten and loosen the screw. It is used on every screwed connection, from panel and terminal block connections to switch, socket and luminaire installation and device repair; electronics-type slim-shaft models are meant for reaching small terminal block screws and narrow recesses.
- Identify the measurement or fastening task and the required insulation safety rating.
- Select jaw profile, cross-section range and accessories for the conductor or fastener standard.
- Check CAT voltage category and replacement tip or die availability for field conditions.
Frequently asked questions
What is Screwdrivers and where is it used?
A screwdriver is a handled hand tool whose end profile seats in the recess of a screw head to tighten and loosen the screw. It is used on every screwed connection, from panel and terminal block connections to switch, socket and luminaire installation and device repair; electronics-type slim-shaft models are meant for reaching small terminal block screws and narrow recesses.
What should I compare when choosing Screwdrivers?
Choose a set by the head profile of the screws you work with (slotted, Phillips, Torx), the bit width and number, the shaft length and the handle design.
Where can I find technical details for Screwdrivers products?
The bit must fill the screw recess fully; a bit that is too small strips the recess, and one that is too large will not seat.