Vises and Clamps
A clamp is a portable tightening tool that temporarily clamps parts between a fixed jaw at the end of a steel bar and a movable jaw that slides on the bar and is tightened by a threaded spindle; it is also known as a woodworking clamp. It is used to hold wooden parts together until the glue dries and to secure the workpiece to the bench or to another part during drilling, cutting or assembly. In this category, İzeltaş plastic-jaw clamps are sold in sizes 40x12, 50x12 and 80x12, and mini clamps in sizes 20x5 and 30x5, per piece; the first value in the size shows the clamping opening and the second the jaw depth, in centimeters. Choose the clamp according to the total thickness of the parts you will clamp, how far in from the edge you will apply pressure and the clamping force needed: the opening must be greater than the total thickness, and the jaw depth must reach the pressure point. Plastic jaw pads reduce marks on wood and painted surfaces. A clamp does not replace a bench vise, which is bolted to the workbench and holds the part steady for operations such as filing or cutting.
Products
- İzeltaş Clamp 80X12 (Carpenter's Vise with Plastic Jaws) — İzeltaş · SKU: 7300308012 · TRY 2,162.23 · In stock
- İzeltaş Mini Clamp 20X5 — İzeltaş · SKU: 7310302005 · TRY 758.40 · In stock
- İzeltaş Clamp 40X12 (Carpenter's Vise with Plastic Jaws) — İzeltaş · SKU: 7300304012 · TRY 1,906.27 · In stock
- İzeltaş Clamp 50X12 (Carpenter's Vise with Plastic Jaws) — İzeltaş · SKU: 7300305012 · TRY 1,952.88 · In stock
- İzeltaş Mini Clamp 30X5 — İzeltaş · SKU: 7310303005 · TRY 820.02 · In stock
How to choose Vises and Clamps
A clamp is a portable tightening tool that temporarily clamps parts between a fixed jaw at the end of a steel bar and a movable jaw that slides on the bar and is tightened by a threaded spindle; it is also known as a woodworking clamp. It is used to hold wooden parts together until the glue dries and to secure the workpiece to the bench or to another part during drilling, cutting or assembly.
- Identify the measurement or fastening task and the required insulation safety rating.
- Select jaw profile, cross-section range and accessories for the conductor or fastener standard.
- Check CAT voltage category and replacement tip or die availability for field conditions.
Frequently asked questions
What is Vises and Clamps and where is it used?
A clamp is a portable tightening tool that temporarily clamps parts between a fixed jaw at the end of a steel bar and a movable jaw that slides on the bar and is tightened by a threaded spindle; it is also known as a woodworking clamp. It is used to hold wooden parts together until the glue dries and to secure the workpiece to the bench or to another part during drilling, cutting or assembly.
What should I compare when choosing Vises and Clamps?
Choose the clamp according to the total thickness of the parts you will clamp, how far in from the edge you will apply pressure and the clamping force needed: the opening must be greater than the total thickness, and the jaw depth must reach the pressure point.
Where can I find technical details for Vises and Clamps products?
A clamp does not replace a bench vise, which is bolted to the workbench and holds the part steady for operations such as filing or cutting.