PLC Connection Modules
A PLC connection module is a distribution module that multiplies the 24 V DC, 0 V or ground potential needed by sensors and actuators at an I/O station across many connection points. It is used to connect the supply and common terminals of three-wire sensors directly next to the I/O modules, without lining up separate terminal blocks. This category contains Delta Electronics AX-5 series models with 24 V DC for 16 I/O, 0 V for 16 I/O, a combination of 24 V DC for 8 I/O and 0 V for 8 I/O, and ground connection for 14 I/O. Select the module according to the potential to be distributed, the number of connection points required, and compatibility with the Delta AX-5 series I/O modules in your station. Verify from the manufacturer's data that the total current passing through the module does not exceed the permitted limit. A connection module only distributes potential; it is not a substitute for a digital I/O module that reads signals or drives outputs.
Products
- Gwest 22-TM-S Ø 22mm Thermometer — Yellow — Gwest · SKU: 6518 · TRY 109.20 · In stock
- Gwest 22-TM-K Ø 22mm Thermometer — Red — Gwest · SKU: 6516 · TRY 109.20 · In stock
- Gwest 22-TM-Y Ø 22mm Thermometer — Green — Gwest · SKU: 6517 · TRY 109.20 · In stock
- Delta AX-516PC20-0A 16 I/O 0V DC Connection Module — Delta Electronics · SKU: AX-516PC20-0A · TRY 1,981.20 · In stock
- Delta AX-516PC30-0A 24V DC for 8 I/Os + 0V DC for 8 I/Os Connection Module — Delta Electronics · SKU: AX-516PC30-0A · TRY 1,981.20 · In stock
- Delta AX-516PC10-0A 16 I/O 24V DC Connection Module — Delta Electronics · SKU: AX-516PC10-0A · TRY 1,981.20 · In stock
- Delta AX-514PC40-0A 14 I/O Ground Connection Module — Delta Electronics · SKU: AX-514PC40-0A · TRY 1,981.20 · In stock
How to choose Connection Modules
A PLC connection module is a distribution module that multiplies the 24 V DC, 0 V or ground potential needed by sensors and actuators at an I/O station across many connection points. It is used to connect the supply and common terminals of three-wire sensors directly next to the I/O modules, without lining up separate terminal blocks.
- Separate sensing, motion control, logic processing and operator interface requirements.
- Select signal type, supply voltage, communication protocol and I/O count for the machine network.
- Verify housing size, sensing distance and PNP/NPN output polarity against the PLC input card.
Frequently asked questions
What is Connection Modules and where is it used?
A PLC connection module is a distribution module that multiplies the 24 V DC, 0 V or ground potential needed by sensors and actuators at an I/O station across many connection points. It is used to connect the supply and common terminals of three-wire sensors directly next to the I/O modules, without lining up separate terminal blocks.
What should I compare when choosing Connection Modules?
Select the module according to the potential to be distributed, the number of connection points required, and compatibility with the Delta AX-5 series I/O modules in your station.
Where can I find technical details for Connection Modules products?
Verify from the manufacturer's data that the total current passing through the module does not exceed the permitted limit.