Gland Gaskets

A gland gasket is the elastic part that wraps the cable inside the body of the cable gland and seals the entry when the clamping head is tightened; the products in this group are multi-hole multi gaskets that let more than one cable pass through a single gland. They are used at enclosure and device entries where thin cables such as sensor, signal and control cables must be passed through the same enclosure hole. Ortaç gaskets are named by common body sizes such as PG 9 - M 16 K, PG 11 - M 16, PG 16 - M 20, PG 21 - M 25 and PG 36 - M 40. Choose a multi gasket by the body size of the gland, the number of holes, and whether the diameter of each hole matches the cable diameter to be passed through. Because more than one model in the same body size is listed under the same name, match the number of holes and the hole diameter with the manufacturer table using the code on the product page. The size in the product name refers to the polyamide gland body, and the equivalent for brass glands may be different. A multi-hole gasket is not the same part as the gland's standard single-hole gasket; if the empty holes are not closed, the entry loses its sealing.

Products

How to choose Gland Gaskets

A gland gasket is the elastic part that wraps the cable inside the body of the cable gland and seals the entry when the clamping head is tightened; the products in this group are multi-hole multi gaskets that let more than one cable pass through a single gland. They are used at enclosure and device entries where thin cables such as sensor, signal and control cables must be passed through the same enclosure hole.

  • Clarify whether the task is connection, cable routing, enclosure distribution or termination.
  • Match dimensions, thread standard, conductor cross-section and IP rating with the cable and panel.
  • Choose housing material and pack quantity according to the mounting environment.

Frequently asked questions

What is Gland Gaskets and where is it used?

A gland gasket is the elastic part that wraps the cable inside the body of the cable gland and seals the entry when the clamping head is tightened; the products in this group are multi-hole multi gaskets that let more than one cable pass through a single gland. They are used at enclosure and device entries where thin cables such as sensor, signal and control cables must be passed through the same enclosure hole.

What should I compare when choosing Gland Gaskets?

Choose a multi gasket by the body size of the gland, the number of holes, and whether the diameter of each hole matches the cable diameter to be passed through.

Where can I find technical details for Gland Gaskets products?

A multi-hole gasket is not the same part as the gland's standard single-hole gasket; if the empty holes are not closed, the entry loses its sealing.

Gland Gaskets Selection Guide: Technical Criteria & Application Standards