Level and Hardness Measuring Instruments
Level and hardness measuring instruments are portable devices that measure the surface hardness of metal parts or the liquid level in an LPG cylinder on site. A Leeb hardness tester is used to measure on site the hardness of large castings and forgings that cannot be carried to a workbench, while an LPG level device is used to find the level of liquid gas remaining in the cylinder from the outside. This category includes the Unit UT347A Leeb hardness tester and the UT345C LPG tank level device; the UT347A offers multi-unit display, statistics and histogram modes on a 2.8-inch color TFT display, and with the UT345C the probe is pressed perpendicularly against different points of the cylinder and the LED color is read. For a hardness tester, compare the material you will measure, the mass and surface roughness of the part and the required hardness unit with the manufacturer's data; for a level device, compare the cylinder diameter and material. The Leeb method calculates hardness from the ratio of the rebound and impact velocities of the impact body, so readings can be misleading on light and thin parts. The LPG tank level device is not a gas leak detector; it only shows the liquid level inside the cylinder.
Products
- Unit UT347A Leeb Hardness Tester — Unit · SKU: UT347A · TRY 19,186.31 · Made to order
- Unit UT345C LPG Tank Level Controller — Unit · SKU: UT345C · TRY 1,507.50 · Made to order
How to choose Level and Hardness Measuring Instruments
Level and hardness measuring instruments are portable devices that measure the surface hardness of metal parts or the liquid level in an LPG cylinder on site. A Leeb hardness tester is used to measure on site the hardness of large castings and forgings that cannot be carried to a workbench, while an LPG level device is used to find the level of liquid gas remaining in the cylinder from the outside.
- Identify the measurement or fastening task and the required insulation safety rating.
- Select jaw profile, cross-section range and accessories for the conductor or fastener standard.
- Check CAT voltage category and replacement tip or die availability for field conditions.
Frequently asked questions
What is Level and Hardness Measuring Instruments and where is it used?
Level and hardness measuring instruments are portable devices that measure the surface hardness of metal parts or the liquid level in an LPG cylinder on site. A Leeb hardness tester is used to measure on site the hardness of large castings and forgings that cannot be carried to a workbench, while an LPG level device is used to find the level of liquid gas remaining in the cylinder from the outside.
What should I compare when choosing Level and Hardness Measuring Instruments?
For a hardness tester, compare the material you will measure, the mass and surface roughness of the part and the required hardness unit with the manufacturer's data; for a level device, compare the cylinder diameter and material.
Where can I find technical details for Level and Hardness Measuring Instruments products?
A Leeb hardness tester is used to measure on site the hardness of large castings and forgings that cannot be carried to a workbench, while an LPG level device is used to find the level of liquid gas remaining in the cylinder from the outside.