Measuring Instrument Accessories
Measuring instrument accessories are probes, test leads, clips, adapters and spare parts that connect devices such as multimeters, clamp meters and oscilloscopes to the measured point or extend the device's area of use. They are used to replace worn test ends, to reach tight spots with a suitable end, and to add functions such as temperature measurement or wireless data transfer to the device. This category lists Unit-branded products such as double-insulated multimeter probes, alligator clips, a K-type temperature probe, an oscilloscope probe, a spare cable set for earth meggers and a Bluetooth adapter. Choose the device model the accessory is compatible with, the connection plug, the safety category (for example CAT III 1000 V), the rated current and the cable length according to your measuring instrument and the installation you will measure. The safety category of a measuring setup is limited by its lowest-category part; a CAT II probe attached to a CAT IV device lowers the setup to CAT II level. A multimeter probe with a 4 mm banana plug does not replace an oscilloscope probe with a BNC connector and a 1:1 or 10:1 attenuation ratio.
Products
- Unit UT-L31 Remote Control Probe — Unit · SKU: UT-L31 · TRY 1,713.06 · Made to order
- Unit UT-C02B Alligator-Jaw Probe Clip — Unit · SKU: UT-C02B · TRY 456.82 · In stock
- Unit UT-T10K Temperature Probe — Unit · SKU: UT-T10K · TRY 228.41 · Made to order
- Unit UT-D07A 4.0 Bluetooth Adapter — Unit · SKU: UT-D07A · TRY 1,598.86 · In stock
- Unit UT-CS09D Flexible Clamp Meter — Unit · SKU: UT-CS09D · TRY 3,289.08 · In stock
- Unit UT-L27 Meter Probe — Unit · SKU: UT-L27 · TRY 274.09 · In stock
- Unit UT-L35 Earth Tester Spare Cable Set — Unit · SKU: UT-L35 · TRY 2,284.08 · Made to order
- Unit UT-L17 LED Illuminated Meter Probe — Unit · SKU: UT-L17 · TRY 251.25 · Made to order
- Unit UT-366 Pitot UT366A Pitot Tube for Digital Manometer — Unit · SKU: UT336 PİTOT · TRY 1,713.06 · Made to order
- Unit UT-L16 Probe — Unit · SKU: UT-L16 · TRY 456.82 · Made to order
- Unit UT-L20 Meter Probe — Unit · SKU: UT-L20 · TRY 159.89 · In stock
- Unit UT362H Hot-Wire Anemometer — Unit · SKU: UT362H · TRY 8,314.07 · Made to order
- Unit UT-L01 Tweezer Probe — Unit · SKU: UT-L01 · TRY 571.02 · In stock
- Unit UT-D07B 5.0 Bluetooth Adapter — Unit · SKU: UT-D07B · TRY 1,872.95 · In stock
- Unit UT-L10 Test Probe — Unit · SKU: UT-L10 · TRY 342.61 · Made to order
- Unit UT-L42 Kelvin Clips, Double Insulated — Unit · SKU: UT-L42 · TRY 1,142.04 · Made to order
- Unit UT-H05 Oscilloscope Probe — Unit · SKU: UT-H05 · TRY 913.63 · In stock
- Unit UT-L02 BNC Alligator Clip — Unit · SKU: UT-L02 · TRY 342.61 · Made to order
- Unit UTE-L16C1 16A Connection Cable with Alligator Clips — Unit · SKU: UTE-L16C1 · TRY 502.50 · In stock
- Unit UT-L07 Probe Double-Insulated Multimeter Pen — Unit · SKU: UT-L07 · TRY 342.61 · In stock
- Unit UT-L90 Extra-Fine Test Probe — Unit · SKU: UT-L90 · TRY 456.82 · Made to order
- Unit UT-M17 Li-ion Thermal Camera Spare Battery — Unit · SKU: UT-M17 · TRY 3,654.53 · Made to order
- Unit UT-L21 Meter Probe — Unit · SKU: UT-L21 · TRY 182.73 · In stock
- Unit UT-P03 Oscilloscope Probe — Unit · SKU: UT-P03 · TRY 639.54 · In stock
- Unit UT-L06 1200 mm CAT III 1000 V 10 A Dual-Head Test Leads — Unit · SKU: UT-L06 · TRY 342.61 · Made to order
How to choose Measuring Instrument Accessories
Measuring instrument accessories are probes, test leads, clips, adapters and spare parts that connect devices such as multimeters, clamp meters and oscilloscopes to the measured point or extend the device's area of use. They are used to replace worn test ends, to reach tight spots with a suitable end, and to add functions such as temperature measurement or wireless data transfer to the device.
- Identify the measurement or fastening task and the required insulation safety rating.
- Select jaw profile, cross-section range and accessories for the conductor or fastener standard.
- Check CAT voltage category and replacement tip or die availability for field conditions.
Frequently asked questions
What is Measuring Instrument Accessories and where is it used?
Measuring instrument accessories are probes, test leads, clips, adapters and spare parts that connect devices such as multimeters, clamp meters and oscilloscopes to the measured point or extend the device's area of use. They are used to replace worn test ends, to reach tight spots with a suitable end, and to add functions such as temperature measurement or wireless data transfer to the device.
What should I compare when choosing Measuring Instrument Accessories?
Choose the device model the accessory is compatible with, the connection plug, the safety category (for example CAT III 1000 V), the rated current and the cable length according to your measuring instrument and the installation you will measure.
Where can I find technical details for Measuring Instrument Accessories products?
They are used to replace worn test ends, to reach tight spots with a suitable end, and to add functions such as temperature measurement or wireless data transfer to the device.
Measuring Instrument Accessories Selection Guide: Technical Criteria & Application Standards