4P CEE Angled Wall Sockets

4P CEE Angled Wall Sockets prices and range: 14 models with current prices, stock status and specifications at Welibaba. A CEE angled wall socket is a CEE standard industrial socket that is surface-mounted on a wall with its own box, with the socket opening angled downward. It is used as a fixed supply point in workshops, factories, construction sites, warehouses and agricultural facilities; because the plug is inserted from below, the cable points downward. This category lists TP Elektrik, Bemis, Bals and PCE sockets in contact and current arrangements such as 3x16A, 4x32A and 5x63A, in IP44 and IP67 ratings; there are also models with a single-phase socket alongside and types with residual current protection. Select the wall socket according to the rated current, pole arrangement and clock position of the plug to be connected, an IP rating suited to the water and dust load of the environment, and the terminal connection type. An IP44 housing withstands water splashed from any direction, while an IP67 housing is dust-tight and protected against temporary immersion in water. The clock position indicates the location of the earth contact; only a plug in the 6h position can be inserted into a socket in the 6h position. An angled wall socket is not an angled panel socket mounted on a panel door; it has its own box and cable entry, so it does not require a separate panel.

CEE Angled Wall and Surface Sockets Selection Guide