Manometers
A manometer is an instrument that measures the pressure of gases and liquids; this category includes a handheld digital manometer that shows positive and negative pressure and the pressure difference between two points on a digital display. It is used to read duct pressure in ventilation and air-conditioning systems, the pressure difference between filter inlet and outlet, and similar low pressures. According to the product data, the Unit UT366A measures in the ±15 kPa range with an accuracy of 0.5 percent of full scale; it displays in units such as kPa, mbar and psi, warns with a green LED for positive pressure and a red LED for negative pressure, and runs on three AAA batteries. Compare the pressure range and unit you will measure, the required accuracy, whether the fluid to be measured is suitable for the device, and the hose connection size against the product data. Because pressure exceeding the range can damage the sensor, the highest expected pressure must stay below the device's limit value. A handheld digital manometer does not replace the dial process manometer that is permanently connected to an installation.
Products
- Unit UT366A Digital Pressure Gauge — Unit · SKU: UT366A · TRY 1,872.95 · Made to order
- Unit UT336P -1–60 bar Wireless Digital Pressure Gauge — Unit · SKU: UT336P · TRY 3,426.13 · Made to order
- Unit UT336V 1–19000 Micron Wireless Vacuum Gauge — Unit · SKU: UT336V · TRY 14,618.14 · Made to order
- Unit UT336E -1–60 bar Digital Manifold Gauge with 3.5-inch Colour Display — Unit · SKU: UT336E · TRY 10,963.60 · Made to order
- Unit UT336P KIT -1–60 bar Wireless Pressure Gauge and Temperature Clamp Kit — Unit · SKU: UT336P KIT · TRY 4,385.44 · Made to order
- Unit UT336E KIT -1–60 bar Digital Manifold Gauge with 2 Wireless Temperature Clamps — Unit · SKU: UT336E KIT · TRY 18,272.67 · Made to order
How to choose Manometers
A manometer is an instrument that measures the pressure of gases and liquids; this category includes a handheld digital manometer that shows positive and negative pressure and the pressure difference between two points on a digital display. It is used to read duct pressure in ventilation and air-conditioning systems, the pressure difference between filter inlet and outlet, and similar low pressures.
- Identify the measurement or fastening task and the required insulation safety rating.
- Select jaw profile, cross-section range and accessories for the conductor or fastener standard.
- Check CAT voltage category and replacement tip or die availability for field conditions.
Frequently asked questions
What is Manometers and where is it used?
A manometer is an instrument that measures the pressure of gases and liquids; this category includes a handheld digital manometer that shows positive and negative pressure and the pressure difference between two points on a digital display. It is used to read duct pressure in ventilation and air-conditioning systems, the pressure difference between filter inlet and outlet, and similar low pressures.
What should I compare when choosing Manometers?
Compare the pressure range and unit you will measure, the required accuracy, whether the fluid to be measured is suitable for the device, and the hose connection size against the product data.
Where can I find technical details for Manometers products?
A handheld digital manometer does not replace the dial process manometer that is permanently connected to an installation.
Environmental Measuring Instruments Selection Guide: Technical Criteria and Engineering Practice