50 Ohm Coaxial Cables
A 50 ohm coaxial cable is a coaxial cable with a characteristic impedance of 50 ohm that carries radio frequency signals between a transmitter, receiver and antenna. It is used as the feed line between the device and the antenna in radio and wireless communication systems, and in WiFi, GPS and distributed antenna systems. In this category, Mekas RG213 U with PVC and halogen-free sheaths and Reçber LWR 240 PE and LWR 400 PE cables are sold by the meter. Choose the cable type according to the attenuation value at the operating frequency and the line length, the outer diameter according to the connector to be used, and the sheath material according to the installation environment; take the values from the manufacturer's technical table. A 50 ohm cable is not a substitute for the 75 ohm cable used in TV and satellite installations; impedance mismatch causes part of the signal to be reflected back.
Products
- Reçber RG 174 Cu HF Cable — Reçber Kablo · SKU: 305065 · TRY 20.94 · In stock
- Reçber RG 174 Cu PVC Cable — Reçber Kablo · SKU: 305051 · TRY 19.69 · In stock
- Reçber RG 58 C /U PVC Cable — Reçber Kablo · SKU: 305052 · TRY 41.65 · In stock
- Reçber RG 213 U HF Cable — Reçber Kablo · SKU: 305067 · TRY 151.98 · In stock
- Reçber RG 58 C /U HF Cable — Reçber Kablo · SKU: 305066 · TRY 43.72 · In stock
- Reçber LWR 240 PE Cable — Reçber Kablo · SKU: 305062 · TRY 52.80 · In stock
- Reçber LWR 400 PE Cable — Reçber Kablo · SKU: 305064 · TRY 157.83 · In stock
- Mekas 50 Ohm PVC Coaxial RG213 U Cable — Mekas Kablo · SKU: 50740 · TRY 109.99 · In stock
- Mekas 50 Ohm Halogen Free Coaxial RG213 U Cable — Mekas Kablo · SKU: 50790 · TRY 116.42 · Made to order
How to choose 50 Ohm Coaxial Cables
A 50 ohm coaxial cable is a coaxial cable with a characteristic impedance of 50 ohm that carries radio frequency signals between a transmitter, receiver and antenna. It is used as the feed line between the device and the antenna in radio and wireless communication systems, and in WiFi, GPS and distributed antenna systems.
- Clarify the circuit duty first: power distribution, control, fire safety, Ethernet or analog signal.
- Compare conductor cross-section, core count, insulation and shielding against the installation route.
- Switch to the proper cable family early when flex duty, oil resistance, halogen-free jacket or fire integrity is required.
Frequently asked questions
What is 50 Ohm Coaxial Cables and where is it used?
A 50 ohm coaxial cable is a coaxial cable with a characteristic impedance of 50 ohm that carries radio frequency signals between a transmitter, receiver and antenna. It is used as the feed line between the device and the antenna in radio and wireless communication systems, and in WiFi, GPS and distributed antenna systems.
What should I compare when choosing 50 Ohm Coaxial Cables?
Choose the cable type according to the attenuation value at the operating frequency and the line length, the outer diameter according to the connector to be used, and the sheath material according to the installation environment; take the values from the manufacturer's technical table.
Where can I find technical details for 50 Ohm Coaxial Cables products?
A 50 ohm cable is not a substitute for the 75 ohm cable used in TV and satellite installations; impedance mismatch causes part of the signal to be reflected back.