WAGO 750-346 Fieldbus Coupler DeviceNet (ECO), I/O System 750

WAGO 750-346 Fieldbus Coupler DeviceNet (ECO), I/O System 750

WAGO 750-346 is a DeviceNet fieldbus coupler (ECO) that connects WAGO I/O System 750 modules to the network; it detects all connected I/O modules and creates the local process image. Technical values: communication DeviceNet; transmission rate 500 kBd (125 kBd, 250 kBd, 500 kBd); bus segment length (max.) 500 m; modules per node (max.) 64; input/output process image (max.) 32 bytes/32 bytes; number of I/O points 6,000; system supply voltage 24 VDC, SELV/PELV (-25–+30 %), via wiring interface (CAGE CLAMP® connection), External fuse required: 2 A slow-blow; total system current 650 mA; fieldbus connection DeviceNet: 1 x Male connector, 5-pole. Connection capacity: system supply solid conductor 0.08–1.5 mm² / 28–16 AWG; strip length 5–6 mm. Material and environment: housing material Polycarbonate; polyamide 6.6; mounting type DIN-35 rail; operating ambient temperature 0–+55 °C; protection type IP20. Dimensions are 49.5 x 96.8 x 71.9 mm (width x height x depth), weight 115 g. Used to connect the modular I/O system as a remote I/O station to a PLC or control system.

Communication ProtocolDeviceNet
Communication Speed500 kBd (125 kBd, 250 kBd, 500 kBd)
Transmission MediumEkranlı Cu kablo; Uzak bus kablosu: 2 x 0.82 mm2 + 2 x 1.7 mm2; Dal kablosu: 2 x 0.2 mm2 + 2 x 0.32 mm2; Segment uzunluğu (maks.): 500 m
Number of ModulesDüğüm başına maks.: 64; Veriyolu uzatması olmadan maks.: 64
Process Image32 bayt/32 bayt
Supply VoltageSistem: 24 VDC, SELV/PELV (-25–+30 %); kablolama arayüzü üzerinden (CAGE CLAMP® bağlantısı); Harici sigorta gereklidir: 2 A geciktirmeli
Current ConsumptionSistem beslemesi: 350 mA; Toplam (sistem beslemesi): 650 mA
Input current11 V DeviceNet arayüzünden: 120 mA; Tip., anma yükte (24 V): 260 mA
Efficiency80 %
Degree of ProtectionIP20
Pollution Degreeacc. to IEC 61131-2: 2
Connection TechnologySaha veriyolu: DeviceNet: 1 x Erkek konnektör; 5 kutuplu; Sistem beslemesi: 4 x CAGE CLAMP®; Cihaz konfigürasyonu: 1 x Erkek konnektör; 4 kutuplu
Conductor MaterialCopper
Connection TypeSistem beslemesi
Solid Conductor Cable Cross-Section0.08–1.5 mm2 / 28–16 AWG
Stranded Conductor Cable Cross-Section0.08–1.5 mm2 / 28–16 AWG
Stripping Length5–6 mm
Width49.5 mm
Height96.8 mm
Depth71.9 mm
Depth from Upper-Edge of DIN-Rail64.7 mm
Mounting TypeDIN 35 ray
ColorLight Gray
Housing MaterialPolikarbonat; poliamid 6.6
Gram115 g
Conformity MarkingsCE
Operating Temperature0–+55 °C
Storage Temperature-25–+85 °C
Operating Altitude0–2000 m
Mounting PositionYatay sol, yatay sağ, yatay üst, yatay alt, dikey üst and dikey alt
Relative Humidity95 %
Vibration resistanceacc. to IEC 60068-2-6
Shock Resistanceacc. to IEC 60068-2-27: 15 g
EMC Immunityacc. to EN 61000-6-2
EMC emission standardsacc. to EN 61000-6-4
Country of OriginGermany
RoHSUyumlu, muafiyetli
Pollutant Gas ResistanceIEC 60068-2-42 and acc. to IEC 60068-2-43; izin verilen H₂S derişimi 10 ppm; izin verilen SO₂ derişimi 25 ppm (relative humidity < 75%)
Maximum I/O Points6.000
Maximum Number of Fieldbus Nodes64 (master üzerinde)

Shipping & assurance

Products in our store stock are handed over to the carrier on the same day, while products requiring procurement are generally handed over within 1–2 business days.

In rare cases, all or part of an order may be unavailable due to stock or procurement updates. In this case, the customer is informed and the relevant product is cancelled and refunded. A product being open for sale does not guarantee that it is in physical store stock.

Carrier hand-over cut-off

  • Weekdays
  • Saturday

Delivery and returns