WAGO 2587-2144 Switched-Mode Power Supply, Base, 1-phase, 24 VDC, 5 A

WAGO 2587-2144 Switched-Mode Power Supply, Base, 1-phase, 24 VDC, 5 A

WAGO 2587-2144 is a 1-phase Base series DIN-rail switched-mode power supply with 24 VDC output voltage, 5 A nominal output current and push-in connection technology. Technical values: nominal input voltage 1 x 100–240 VAC; input voltage range 1 x 90–264 VAC (Derating -1 %/V for voltage < 100 VAC); mains frequency 47 Hz / 63 Hz; nominal output voltage 24 VDC (SELV); nominal output current 5 A (24 VDC); nominal output power 120 W; output voltage range 23.5–28 VDC (adjustable); efficiency 88 %; residual ripple ≤ 100 mV (peak-to-peak); overload behavior Shutdown and automatic restart in the event of a short circuit. Material and environment: mounting type DIN-35 rail; operating ambient temperature -30–+70 °C (Device starts at -40 °C (type-tested)); protection type IP20; per EN 60529. Dimensions: width 35 mm, height 125 mm, depth from upper edge of DIN-rail 102 mm, weight 470 g. Used to supply PLCs, sensors, relays and other 24 VDC control circuits inside control panels.

Supply Type / Input Voltage1 x 100–240 VAC
Output Current5 A
Output Voltage24 VDC
Phase Type1-Phase
Power120 W
Input Voltage Range1 x 90–264 VAC (100 VAC altındaki gerilimlerde güç azaltma -1 %/V)
Frequency Range47 Hz / 63 Hz
Input current≤ 4 A
Inrush Current≤ 35 A (230 VAC / 25 °C değerinde)
Power Factor≥ 0.6 (115 VAC); ≥ 0.48 (230 VAC); PFC: Pasif
Hold-up Time≥ 50 ms (230 VAC)
Output Voltage Adjustment Range23.5–28 VDC (adjustable)
Leakage current≤ 416 µA
Residual Ripple≤ 100 mV (tepe-tepe)
Overload ProtectionKısa devre durumunda kapanma and otomatik yeniden başlama
Status IndicatorOptik durum göstergesi (DC OK)
Power Loss≤ 5 W (bekleme); ≤ 16.8 W (Tam load)
Efficiency88 %
Internal fuseT 5 A / 250 V
Test VoltagePrimer-sekonder (AC): 3.510 V; Primer-PE (AC): 2.210 V
Electric Shock Protection ClassI
Degree of ProtectionIP20; acc. to EN 60529
Overvoltage categoryIII (≤ 2000 m); II (> 2000 m)
Pollution Degree2
Short-Circuit ProtectionYes
Parallel / Series ConnectionParalel: Evet, aynı tipteki 2 cihaz için; Seri: Evet, aynı tipteki 2 cihaz için
MTBF> 1.000.000 h (25 °C değerinde; acc. to IEC 61709; SN 29500)
Connection TypeGiriş/çıkış
Connection TechnologyPush-in CAGE CLAMP®
Solid Conductor Cable Cross-Section0.2–6 mm2 / 24–10 AWG
Stranded Conductor Cable Cross-Section0.2–6 mm2 / 24–10 AWG
Conductor Cross-Section with FerruleYalıtımlı yüksükle: 0.25–2.5 mm2; Yalıtımsız yüksükle: 0.25–2.5 mm2
Stripping Length10–12 mm
Width35 mm
Height125 mm
Depth from Upper-Edge of DIN-Rail102 mm
Mounting TypeDIN 35 ray
Gram470 g
Operating Temperature-30–+70 °C (Cihaz -40 °C'de çalışmaya başlar (tip testli))
Storage Temperature-40–+85 °C

Shipping & assurance

Products in our store stock are handed over to the carrier on the same day, while products requiring procurement are generally handed over within 1–2 business days.

In rare cases, all or part of an order may be unavailable due to stock or procurement updates. In this case, the customer is informed and the relevant product is cancelled and refunded. A product being open for sale does not guarantee that it is in physical store stock.

Carrier hand-over cut-off

  • Weekdays
  • Saturday

Delivery and returns