WAGO 2587-2347 Switched-Mode Power Supply, Base, 3-phase, 24 VDC, 20 A

WAGO 2587-2347 Switched-Mode Power Supply, Base, 3-phase, 24 VDC, 20 A

WAGO 2587-2347 is a 3-phase Base series DIN-rail switched-mode power supply with 24 VDC output voltage, 20 A nominal output current and push-in connection technology. Technical values: nominal input voltage 3 x 400–500 VAC; input voltage range 3 x 340–550 VAC; mains frequency 47 Hz / 63 Hz; nominal output voltage 24 VDC (SELV); nominal output current 20 A (24 VDC); nominal output power 480 W; output voltage range 23.5–28 VDC; efficiency 90 % (400 VAC, nominal load); residual ripple ≤ 60 mV (peak-to-peak); overload behavior Constant power up to 150 %, short-circuit shutdown with automatic restart. Material and environment: mounting type DIN-35 rail; operating ambient temperature -30–+70 °C (Device starts at -40 °C (type-tested)); protection type IP20. Dimensions: width 60 mm, height 125 mm, depth from upper edge of DIN-rail 125 mm, weight 1010 g. Used to supply PLCs, sensors, relays and other 24 VDC control circuits inside control panels.

Supply Type / Input Voltage3 x 400–500 VAC
Output Current20 A
Output Voltage24 VDC
Phase Type3-Phase
Power480 W
Input Voltage Range3 x 340–550 VAC
Frequency Range47 Hz / 63 Hz
Input current≤ 1.2 A (340 VAC; anma yükü)
Inrush Current≤ 20 A (400 VAC / 25 °C değerinde)
Power Factor≥ 0.93 (400 VAC); PFC: Aktif
Hold-up Time≥ 20 ms (3 x 400 VAC)
Output Voltage Adjustment Range23.5–28 VDC
Leakage current≤ 1.08 mA
Residual Ripple≤ 60 mV (tepe-tepe)
Overload Protection150 %'ye kadar sabit güç; kısa devrede kapanma and otomatik yeniden başlama
Status IndicatorOptik durum göstergesi (DC OK, yeşil LED) / Sinyal çıkışı (DC OK)
Power Loss≤ 7 W (yüksüz); ≤ 48 W (anma yükü)
Efficiency90 % (400 VAC; anma yükü)
Internal fuseT 5 A / 600 VAC
Test VoltagePrimer-sekonder (AC): 3.510 V; Primer-PE (AC): 2.200 V; Sekonder-PE: 0.5 kVDC; Sekonder-sinyal: 0.5 kVDC
Electric Shock Protection ClassI
Degree of ProtectionIP20
Overvoltage categoryIII (≤ 2000 m deniz seviyesinden; 300 V değerinde); II (≤ 5000 m deniz seviyesinden; 300 V değerinde)
Pollution Degree2
Short-Circuit ProtectionYes
Parallel / Series ConnectionParalel: Evet, aynı tipteki 2 cihaz için; Seri: Evet, aynı tipteki 2 cihaz için
MTBF> 1.000.000 h (25 °C değerinde; acc. to IEC 61709; SN 29500)
Connection TypeBağlantı 1: Giriş/çıkış; Bağlantı 2: Sinyalizasyon
Connection TechnologyBağlantı 1: Push-in CAGE CLAMP®; Bağlantı 2: Push-in CAGE CLAMP®
Solid Conductor Cable Cross-SectionBağlantı 1: 0.2–10 mm2 / 24–8 AWG; Bağlantı 2: 0.14–1.5 mm2 / 28–16 AWG
Stranded Conductor Cable Cross-SectionBağlantı 1: 0.2–10 mm2 / 24–8 AWG; Bağlantı 2: 0.14–1.5 mm2 / 28–16 AWG
Conductor Cross-Section with FerruleBağlantı 1: Yalıtımlı yüksükle: 0.25–6 mm2; Yalıtımsız yüksükle: 0.25–6 mm2; Bağlantı 2: Yalıtımlı yüksükle: 0.25–0.75 mm2; Yalıtımsız yüksükle: 0.25–1.5 mm2
Stripping LengthBağlantı 1: 13–15 mm; Bağlantı 2: 8–9 mm
Width60 mm
Height125 mm
Depth from Upper-Edge of DIN-Rail125 mm
Mounting TypeDIN 35 ray
Gram1010 g
Operating Temperature-30–+70 °C (Cihaz -40 °C'de çalışmaya başlar (tip testli))
Storage Temperature-40–+85 °C

Shipping & assurance

Products in our store stock are handed over to the carrier on the same day, while products requiring procurement are generally handed over within 1–2 business days.

In rare cases, all or part of an order may be unavailable due to stock or procurement updates. In this case, the customer is informed and the relevant product is cancelled and refunded. A product being open for sale does not guarantee that it is in physical store stock.

Carrier hand-over cut-off

  • Weekdays
  • Saturday

Delivery and returns